May 18-22, 2003 - Santa Fe, New Mexico, USA
| Editors: | Paul Watkinson, University of British Columbia, Canada |
|---|---|
| Hans Müller-Steinhagen, German Aerospace Centre (DLR) and University of Stuttgart | |
| M. Reza Malayeri, German Aerospace Centre (DLR) |
The articles for these proceedings are peer-reviewed.
Articles from 2003
Table of Contents, The Editors
Preface, The Editors
Fouling During the Use of Seawater as Coolant - The Development of a ‘User Guide’, S. Pugh, G.F. Hewitt, and H. Müller-Steinhagen
Physical Water Treatment for the Mitigation of Mineral Fouling in Cooling-Tower Water Applications, Young I. Cho, SungHyuk Lee, Wontae Kim, and Sangho Suh
Investigation of Initial Fouling Rates of Calcium Sulfate Solutions under Non-Boiling Conditions (Work-in-Progress), Feridoun Fahiminia, A. Paul Watkinson , and Norman Epstein
Crystallisation Fouling Of Mixed Salts During Convective Heat Transfer And Sub-Cooled Flow Boiling Conditions, A. Helalizadeh, H. Müller-Steinhagen, and M. Jamialahmadi
Crystallization Fouling Of The Aqueous Two-Component System CaSO4/CaCO3, Volker Höfling, Wolfgang Augustin , and Matthias Bohnet
Deposition of Na2CO3 in Supercritical Water Oxidation Systems and its Mitigation, M. S. Khan and S. N. Rogak
Heat Exchanger Fouling in Phosphoric Acid Evaporators - Evaluation of Field Data -, R. M. Behbahani, H. Müller-Steinhagen, and M. Jamialahmadi
Bayer Process Heat Exchangers Cleaning Efficiency: Optimizing the Acid Dissolution of Sodalite Scale, Sébastien Fortin and Raymond Breault
Sodium Aluminosilicate Solid Phase Specific Fouling Behaviour , Jonas Addai-Mensah, Jun Li, Marek Zbik, and Scott Rosencrance
A Comparison of the Operating Characteristics of Two Cooling Water Systems using Chlorine and Chlorine Dioxide Biocides, T. R. Bott and I.E. C. Mott
Large-Scale Plasma Polymer Coating on Heat Exchanger Fins for Improving the Wettability, Ki-Hwan Kim, Dae-Hwan Yeu, Samchul Ha, and Seok-Keun Koh
Fouling and Cleaning of Modified Stainless Steel Plate Heat Exchangers Processing Milk Products, M. Beuf, G. Rizzo, J. C. Leuliet, H. Müller-Steinhagen, S. Yiantsios, A. Karabelas, and T. Benezech
Permanent Hydrophilic Surface Formation by Ion Assisted Reaction, Ki-Hwan Kim, Jun Sik Cho, Sung Han, Young Whoan Beag, Byung Ha Kang, Samchul Ha, and Seok-Keun Koh
Study of The Influence of Bulk Properties and Surface Tension on the Deposition Process of Calcium Phosphate on Modified Stainless Steel, R. Rosmaninho, G. Rizzo, H. Müller-Steinhagen, and L. F. Melo
Numerical Simulation of the Fouling on Structured Heat Transfer Surfaces (Fouling), Fahmi Brahim, Wolfgang Augustin, and Matthias Bohnet
Removal of Particles from a Powdery Fouled Surface due to Impaction, M. S. Abd-Elhady, C. C.M. Rindt, J. G. Wijers, and A. A. van Steenhoven
Heat Treatment Improvement of Dairy Products via Ohmic Heating Processes : Thermal and Hyrodynamic Effect on Fouling, M. A. Ayadi, L. Bouvier, F. Chopard, M. Berthou, and J. C. Leuliet
Analysis of Fouling Data Based on Prior Knowledge, M. R. Malayeri and H. Müller-Steinhagen
Challenges in Cleaning: Recent Developments and Future Prospects, D. I. Wilson
A Mathematical Model of the Removal of Milk Protein Deposit, Hong Xin, Xiao Dong Chen, and Necati Özkan
The Balance Between in the Cleaning of Milk Fouling Deposits, G. K. Christian and P. J. Fryer
Study of Whey Protein Adsorption under Turbulent Flow , Olga Santos, Tommy Nylander, Gerhard Rizzo , Hans Müller-Steinhagen, Christian Trägårdh, and Marie Paulsson
Direct Measurement of the Forces Required to Disrupt and Remove Fouling Deposits, W. Liu, Z. Zhang, G. K. Christian, and P. J. Fryer
Fouling of Some Canadian Crude Oils, M. Srinivasan and A. P. Watkinson
Preheat Train Crude Distillation Fouling Propensity Evaluation by the Ebert and Panchal Model, M. Bories and T. Patureaux
Retrofitting Crude Oil Refinery Heat Exchanger Networks to Minimise Fouling While Maximising Heat Recovery, B. L. Yeap, D. I. Wilson, G. T. Polley, and S. J. Pugh
Chemical Cleaning of Oil Refinery Heat Exchangers -- The Need for a Joint Effort , Himanshu M. Joshi and Glen Brons
Analysis and Steps to Mitigate Heat Exchanger Fouling in an Aromatics Plant, Shinji Isogai and Mitsutaka Nakamura
Fouling Characteristics of a Light Australian Crude Oil, Zaid S. Saleh, R. Sheikholeslami, and A. P. Watkinson
Comparison of Crude Oil Fouling Using Two Different Probes, A. P. Watkinson
Measurement and Modeling for the Mitigation of Organic Crystallization Fouling, Shinji Isogai, Mitsutaka Nakamura, Hirofumi Inokuchi, Hiroaki Kimura, and Yoshio Koga
Development of a Data-Based Method for Performance Monitoring of Heat Exchangers, A. Sawyer, A. E. Ruggles, B. R. Upadhyaya, E. Eryurek, K. Kavaklioglu, and J. Miller
The Early Stages of Deposition of Magnetite Particles onto Alloy-800 Heat Exchange Surfaces under Subcooled Boiling Conditions, Norman Arbeau, William Cook , and Derek Lister
Fouling Enhancement under Flow Boiling at Elevated Steam Qualities, S. J. Klimas, J. M. Pietralik, K. Fruzzetti , and R. L. Tapping
Identification and Testing of Amines for Steam Generator Corrosion and Fouling Control, S. J. Klimas, K. Fruzzetti, C. W. Turner, P. V. Balakrishnan, G. L. Strati , and R. L. Tapping
Overview of Actual Methods for Characterization of Ash Depostion, Ch. López, S. Unterberger, J. Maier, and K. R. G. Hein
Improvements and New Developments in Self-Cleaning Heat Transfer Leading to New Applications , Dick G. Klaren
The Practical Application and Innovation of Cleaning Technology for Heat Exchangers, George E. Saxon Jr. and Richard E. Putman
Understanding and Quantifying Cleaning Processes Using Fluid Dynamic Gauging, J. Y. M. Chew, S. S. S. Cardoso, W. R. Paterson, and D. I. Wilson
Biocide Dosing Strategies for Biofilm Control, D. M. Grant and T. R. Bott
Fouling Mitigation Using Helixchanger Heat Exchangers, Bashir I. Master, Krishnan S. Chunangad, and Venkateswaran Pushpanathan
An Effective CIP Procedure for Removing Dairy Protein Based Deposit – A Laboratory Investigation, Xiao Dong Chen, Necati Özkan, Frank Qin, Hong Xin, and Lin Lin