May 19-23, 2025
Espoo, Finland
| Chairs: | C. Leonelli, Universita’ degli Studi di Modena e Reggio Emilia |
|---|---|
| J. Yliniemi, University of Oulu | |
| W.M. Kriven, University of Illinois at Urbana-Champaign | |
| J.L. Provis, Paul Scherrer Institut, Switzerland | |
| A.R. Boccaccini, University of Erlangen-Nuremberg |
25 conference program - Alkali Activated Materials and Geopolymers: High-End Technical Applications, Cristina Leonelli, W.M. Kriven, John L. Provis, Arie van Riessen, and Juho Yliniemi (Article)
Self–sustaining cementitious processes in ancient Roman architectural and marine concretes, Marie D. Jackson (Abstract)
Challenges and opportunities in material selection for geopolymers and alkali–activated materials in brazil: A focus on sustainable and cost– effective solutions, Ana C. Trindade (Abstract)
Production of low CO2 slag binder using 2,3–dihydroxynaphthalene as chemical admixture– Hydration and dissolution properties, Rajeswari Ramaswamy and Juho Yliniemi (Abstract)
Sustainable construction materials: The role of wollastonite in alkali activation and gel network formation, Veronica Viola, Prince d Allah, Priyadharshini Perumal, and Michelina Catauro (Abstract and Presentation)
Monitoring reaction kinetics in alternative cementitious systems through electrical conductivity measurements, Julson Aymard Tchio, Elijah Adesanya, Rafal Sliz, Brant Walkley, and Juho Yliniemi (Abstract and Presentation)
Methods for determining the reactivity of AAMs precursors, Arie van Riessen, John de Laeter Centre, Evan Jamieson, Hendrik Gildenhuys, and Jarrad Allery (Abstract)
How to achieve specific properties by controlling the chemistry of a geopolymer?, Sylvie Rossignol (Abstract and Presentation)
Utilizing phlogopite residue in alkali–activated materials, Mahtab Akbarzadeh Khoei, Julson . Tchio, Juho Yliniemi, Juho Sirviö, and Labeed Ahmad (Abstract)
Sustainable recycling of industrial wastes by using geopolymers, Antonio D’Angelo, Marika Fiorentino, Michelina Catauro, Luigi Vertuccio, and Veronica Viola (Abstract)
Granulation of biomass fly ash: Effect of curing and carbonation on the microstructure of highly porous alkali–activated aggregates, Anže Tesovnik and Vilma Ducman (Abstract)
Economic feasibility of construction waste screening residues as a local supplementary material for geopolymer concrete, Qaisar Munir and Timo Kärki (Abstract)
Alkali–Activated Materials in precast construction industry: A case study from Consolis Parma, Jenni Kiventerä and Juha Rämö (Abstract)
The practical application of activated legacy ash in road applications in South Africa and USA, Cyril Attwell (Abstract)
Increasing rheological parameters of geopolymer paste using quaternary ammonium compounds, Vlastimil Bílek, David Markusík, and Pavel Rovnaník (Abstract)
Valorization of unsorted construction and demolition waste through geopolymerization, Francesca Servadei, Annalisa Natali Murri, Elena Landi, Valentina Medri, and Elettra Papa (Abstract)
And after the research is done, what is next? Experiences, suggestions and open questions, Yiannis Pontikes (Abstract)
Alkali-Activated Materials for acid mine drainage remediation: a game changer or a utopian dream?, Rui Miguel Novais, Mariana M. Almeida, Jaime G. Cuadra, João A. Labrincha, Ana P.F. Caetano, and Nuno P.F. Gonçalves (Abstract)
Possibilities and limitations of geopolymers in real-world wastewater treatment applications, Tero Luukkonen (Abstract and Presentation)
Leaching control of metakaolin-based geopolymers for galvanic sludge encapsulation, Isabella Lancellotti, Mattia Giovini, Francesco Genua, Elisa Santoni, Mario Berrettoni, Silvia Zamponi, and Cristina Leonelli (Abstract)
Geopolymer-based materials for the removal of phosphates and ammonium from wastewaters, Elettra Papa, Valentina Medri, Cristina Di Pietro, Walter Felix Cossio Guzman, Davide Pinelli, Dario Frascari, and Elena Landi (Abstract)
Geopolymer and geopolymer-zeolite adsorbents for environmental remediation, Valentina Medri, Elettra Papa, Cristina Di Pietro, Claudia Stevanin, Luisa Pasti, Walter Felix Cossio Guzman, Maria Chiara Marchioni, Francesco Miccio, Elena Landi, and Matteo Minelli (Abstract)
Sodium sulfate activated slag for solidification and stabilization of Hanford effluent treatment facility liquid secondary waste: An overview, Weiliang Gong, Howard Abramowitz, and Ian L. Pegg (Abstract)
Tailoring of the textural properties of geopolymer and zeolite- geopolymer materials: foaming and cold sintering process, Cristina Di Pietro, Elettra Papa, Valentina Medri, Elena Landi, Chiara Capacci, and Maria Chiara Marchioni (Abstract)
Alkali activation of sludges rich in silicon, Maria Chiara Marchioni, Alessandra Zoppis, Emanuele Corsi, Elettra Papa, Valentina Medri, and Francesco Miccio (Abstract)
Nitrogen adsorption and pore size distribution in metakaolin-based geopolymer composites reinforced with mineral particles and basalt or bamboo fibers, Waltraud Kriven, Devon M. Samuel, Marilene G. Sa Ribeiro, and Ruy A. Sa Ribeiro (Abstract)
Industrial residues as a part of novel construction materials – a case study with complex pulp mill waste green liquor dregs, Juho Rasmus, Elijah Adesanya, Juho Yliniemi, Katja Kilpimaa, and Mirja Illikainen (Abstract)
Crossover from Portland Cement to alkali-activated materials and geopolymers: Structural relationships of the binders and their affinities to sequestrate CO2, Claus Henning Rüscher (Abstract)
Geopolymer based materials for the decontamination of nuclear wastewater, Alban Gossard (Abstract)
Interplay between geopolymer formulation, microstructure, and strontium sorption properties, Alexis Varon, Alban Gossard, Yannick Coppel, Yves Barré, and Arnaud Poulesquen (Abstract)
Geopolymer composites for enhanced neutron and gamma-ray shielding in nuclear power applications, Waltraud Kriven, Angela Di Fulvio, Alexander Fields, and Jianxin Zhou (Abstract)
Use of intumescent geopolymer coatings to safeguard various substrates under temperature, Wilfried N. Cho, N’Cho Wilfried, and Rossignol Sylvie (Abstract)
Norite mine tailing based AAMs exposed to 1000°C, David D. E Brennhaugen,; Adam Schaen; Torbjørn Vrålstad; and Priyadharshini Perumal (Abstract and Presentation)
Use of an assembly based geopolymer to limit heat transfer to 1600°C, Sylvie Rossignol, Ouamara Lila, and Rossignol Sylvie (Abstract and Presentation)
Development of mullite coatings from organic, charge-balanced geopolymer for oxidation resistance, Waltraud Kriven, Deyvid do Carmo Silva, Seongyong Hong, Tonghun Lee, Waltraud M. Kriven, and Kenneth S. Kim (Abstract)
Performance of thermal resistant geopolymer with alumina as ceramic weld backing applications, Duangrudee Chaysuwan, Pakamon Kittisayarm, Chayanee Tippayasam, Cristina Leonelli, Chanchana Thanachayanont, and Greg Heness (Abstract and Presentation)
Sustainable waste management in ceramic tile production: Inertization of exhausted lime using alkali activation of incinerator bottom ash, Francesco Genua, Antonio Stroscio, Cristina Leonelli, Isabella Lancellotti, Gian Marco Malagoli, and Eleonora Vaccari (Abstract)
Additive manufacturing of geopolymers, Paolo Colombo (Abstract)
Innovative geopolymer mortars from CDWs for 3D printing, Miguel Otero, Marisol Rivas, Lorena Freire, Rebeca Abalde, José Guillermo, and Juan Diego Fernández (Abstract and Presentation)
A structural approach on the effect of consolidation temperature on geopolymer materials, Anass El Khomsi, Gharzouni Ameni, Rossignol Sylvie, and Martinod Edson (Abstract)
Geopolymer oxygen carrier for improved gasification of biomass, Francesco Miccio, Lucrezia Polcri, Valentina Medri, Annalisa Natali Murri, and Elena Landi (Abstract)
Clay-cellulose-lignin composite materials: evaluating a sustainable concrete alternative, Oren Regev, Peter Fratzl, Markus Antonietti, and Emeline Raguin (Abstract)
Valorization of ceramic waste and wood biomass ash in alkali activated materials: assessment of carbon sinking ability, Giulia Masi, Carlotta Pacente, Davide Nettis, Simone Bandini, and Simone Bandini (Abstract)
Geomechanical characterization of a copper mine tailing stabilized with an alkali activated binder, Tiago Miranda, Hamid Reza Manaviparast, Eduardo Pereira, Vítor Cunha, and Nuno Cristelo (Abstract)
Life cycle assessment of an alkali activated binder for copper mine tailings stabilization, Eduardo Pereira, Rafael Santos, Norma Gaibor, Tiago Miranda, Vítor Cunha, and Nuno Cristelo (Abstract)
Geopolymers and their potential applications, Waltraud M. Kriven (Abstract)
\Cold sintering of geopolymer powder, Lorenzo Lattanzi, Agusti Sin, Javier Mena Garcia, Clive Randall, and Paolo. Colombo (Abstract)
Municipal Solid Waste used as precursor and fine aggregate in thermal insulating lightweight geopolymer concrete, Nuno Cristelo, Ahmad Jan, Megha Ramteke, Alexandre Jerónimo, Ana Briga-Sá, and Ana Fernández-Jiménez (Abstract)
Using XRD to assess the strength of fly ash and metakaolin-based geopolymers, Hendrik Gildenhuys, Arie van Riessen, Evan Jamieson, Jarrad Allery, and Ramon Skane (Abstract)
Mechanical performance and practical challenges of potassium silicate activated ground granulated blast furnace slag mortars for textile reinforced concrete, Gulsen Nazerian, Silviana ) Onisei, Hubert Rahier, and Tine Tysmans (Abstract)
Efficient shaped porous alkali-activated adsorbents for metal recovery, Mika Petteri Christophliemk, Anne Heponiemi, Sari Tuomikoski, Minja Korhonen, Janne Pesonen, Mirja Piispanen, and Hanna Runtti (Abstract)
Porous geopolymers for thermal insulation: an environmental assessment by LCA methodology, Valentina Medri, Alessandro Francini, Roberto Rosa, Anna Maria Ferrari, and Maria Chiara Marchioni (Abstract)
Effect of activator type and molarity on rheology and surface chemistry of alkali-activated slag, David Markusík and Vlastimil Bílek (Abstract)
Mild alkali activation for valorization of WEEE glass and volcanic quarry scraps to obtain building materials, Isabella Lancellotti, Emanuele De Rienzo, Francesco Carollo, Antonio D’Angelo, Luisa Barbieri, Enrico Bernardo, Michela Catauro, and Cristina Leonelli (Abstract)
Design of aluminosilicate refractory matrices in the context of climate change: a case study, Elie Kamseu, Paolo Veronesi, Cristina .leonelli, and Isabella Lancellotti (Abstract)
Improving the cellulose/metakaolin geopolymer composite properties through a novel low- water approach, Luca Bertolla, Gianmarco Taveri, Petra Macová, Konstantinos Sotiriadis, Filip Šiška, and Vojtěch Nádaždy (Abstract)
Advanced concrete treatment via modified alkaline silicate solutions, Lukas Kalina, Vlastimil Bilek Jr, Jan Koplík, Vladislav Cába, Martin Sedlačík, and David Markusík (Abstract)
Design of multifunctional foams for water remediation: the Zeoremedia project, Claudio Ferone, Assunta Campanile, Paolo Aprea, Federica Falzarano, and Barbara ; Liguori (Abstract and Presentation)
A novel reduced graphene oxide-geopolymer composite for Methylene Blue enhanced adsorption, Alessio Occhicone, Alessandro Cesaro, Oreste Tarallo, Claudio Ferone, and Giuseppina Roviello (Abstract)
Impact of inherent characteristics of raw laterite and its calcination on properties of geopolymers, Claus Rüscher, Sylvain Tome, Jean. Noel Y. Djobo, and Hong Wong (Abstract)
Application of the polydisperse spherical model for pore distribution development of metakaolin-based geopolymers, Kanako Toda, Ryuhei Motokawa, and Takumi Saito (Abstract and Presentation)
Immobilization of cesium and selenium in fly-ash/slag-based geopolymer matrices, Maël Viaud, Kanako Toda, and Takumi Saito (Abstract)
Compositional effects in potassium metakaolin geopolymers containing alumina and glass frit, Waltraud Kriven, Patrick F. Keane, and Frank Bruno (Abstract)
Effect of H2-DRI-EAF slag carbonation as co-binder admixture in alkali activated blast furnace slag, Srujana Gouda, Patrick Ninla Lemougna, Hoang Nguyen, and Juho Yliniemi (Abstract)
X-ray absorption spectroscopy study on zinc immobilization in metakaolin-based potassium-geopolymer, Pramesti Prihutami; Raudhatul Islam Chaerun; Yusuke Ohya; Kanako Toda; Takumi Saito; Ryosuke Kikuchi; Tsubasa Otake; and Tsutomu Sato, (Abstract)
Tailored geopolymers for ammonium adsorption from anaerobic digestate, Daniela Pinto, Maryem Medini, Vito Cofano, and Marina Clausi (Abstract)
The effect of basalt glass microspheres and microfibers on the wear resistance of metakaolin-based geopolymer composites, Yurii Zubko, Yevgeniy Zubko, and Waltraud M. Kriven (Abstract)
Transforming sulfidic mine tailings into high-performance geopolymer composites: a sustainable approach to waste valorization, Pozhhan Mokhtari, Joey Lin, Prapassorn Numkiatsakul, and Waltraud M. Kriven (Abstract)
Modification of rheological properties of metakaolin based geopolymer using graphene oxide, Seralathan Sivasubramaniam and Yogarajah Elakneswaran (Abstract and Presentation)
Hygrothermal regulation of indoor environment by lightweight/porous alkali-activated materials, Joao Labrincha, Tânia Gameiro, and Rui M. Novais (Abstract)
Fabrication of a lightweight geopolymer bonded sandstone building material by ceramic extrusion process, David Werner, Dr. Axel- Müller-Köhn, and Dr. Tassilo Moritz (Abstract)
Utilization of co-combustion fly ash in alkali-activated materials and cement mortar: feasibility and heavy metal leaching analysis, Suman Kumar Adhikary, Tero Luukkonen, and Priyadharshini Perumal (Abstract)