June 5-9, 2017 Schloss Hernstein Hernstein, Austria

Editors:   Jürgen Groll (University of Würzburg, Germany)
  Jos Malda (University Medical Centre Utrecht, The Netherlands)

The articles for these proceedings are not peer-reviewed.



Conference Program, Jürgen Groll and Jos Malda (Abstract)

Biofabrication of 3D hard-soft and composite constructs for bone regeneration, Aldo . R. Boccaccini, Tobias Zehnder, and Rainer Detsch (Abstract)

Extrusion-based bioprinting in musculoskeletal tissue engineering, Wojciech Swieszkowski, Marco Costantini, Joanna Idaszek, and Alicja Kosik (Abstract)

Landmarks from kidney primordia for organ printing strategies, Seppo Vainio (Abstract)

Integrating cell sheets for kidney-on-a-chip applications, William Loewenhardt, Sahithi Kuravi, Rachel E. Saunders, Rachel Lennon, and Brian Derby (Abstract)

Multiphoton lithography of 3D hydrogel structures within microfluidic chips, Aleksandr Ovsianikov (Abstract)

Melt electrospinning writing and the biofabrication of voluminous tissues and organs, Paul Dalton (Abstract)

Intelligent hydrogel design: Towards more performing hydrogel processing, Sandra Van Vlierberghe, Annemie Houben, Jasper Van Hoorick, Aleksandr Ovsianikov, Peter Gruber, Marica Markovic, Penny Martens, Patrice Roose, Dirk Bontinck, Hugues Van Den Bergen, Heidi Declercq, and Peter Dubruel (Abstract)


Biofabrication using recombinant spider silk proteins as a biomaterial, Tamara B. Aigner, Elise K. DeSimone, and Thomas Scheibel (Abstract and Presentation)

Medical adhesives for 3D printing, Malgorzata K. Wlodarczyk-Biegun, Julieta Paez, Maria Villiou, and Aranzazu del Campo (Abstract)

Control of cross-linking density in bioinks and integration of nanotechnology, Jürgen Groll (Abstract)

A self-assembly based supramolecular bioink with hierarchical control As a new bioprinting tool, Clara L. Hedegaard, Estelle Collin, Carlos Redondo-Gomez, J. Rafael Castrejón-Pita, Alvaro Mata, Kee Woei Ng, and Alfonso A. Castrejón-Pita (Abstract)

Tensiometric estimation of material properties of tissue spheroids, Vladimir Mironov, Parfenov V, Karalkin P, Bulanova E, Koudan E, Pereira F, Gryadunova A, Knyaseva A, Hesuani Yu, Kasyanov V, Chernikov V, and Korneva J (Abstract)

Two-step screening process to evaluate printability of inks for extrusion-based bioprinting, Tomasz Jüngst, Naomi Paxton, Willi Smolan, and Jürgen Groll (Abstract)

Evaluation of bioink printability with quantitative methods to aid material development, Lotte Groen, Alexandre Ribeiro, Tina Vermonden, Wim Hennink, Maarten Blokzijl, Miguel Castilho, Jos Malda, and Riccardo Levato (Abstract)

Complex and patient-specific scaffolds and tissue engineering constructs by extrusion-based 3D (bio) printing, Michael Gelinsky (Abstract)

Bioprinting of vascularized bone tissue equivalents, Petra J. Kluger, Annika Wenz, Iva Tjoeng, Julia Rogal, and Kirsten Borchers (Abstract)

Suspended manufacture of biological structures, Megan Cooke, Sophie Cox, Simon Jones, Liam Grover, Samuel Moxon, Martyn Snow, Lee Jeys, and Alan Smith (Abstract)

Application of different cell populations in hydrogel bioinks for zonal Cartilage biofabrication, Iris Otto, Riccardo Levato, Richard Webb, René van Weeren, Ilyas Khan, and Jos Malda (Abstract)

3D-microfibers improve the shear modulus of hydrogel composites, Mylène de Ruijter, Paul D. Dalton, Andrei Hrynevich, Jodie N. Haigh, Gernot Hochleitner, Jürgen Groll, Jos Malda, and Miguel D. Castilho (Abstract)

Changing the diameter of 3D printed tissue engineering scaffolds made via melt electrospinning writing, Andrei Hrynevich, P. D. Dalton, J. Groll, Jodie N. Haigh, G. Hochleitner, and B. Şen Elçi (Abstract)

A multiangular approach towards biofabrication of an auricular cartilage implant, Iris Otto, Jos Malda, Riccardo Levato, Moshe Kon, and Corstiaan Breugem (Abstract)


Visions for the field by a pioneer, Vladimir Mironov (Abstract)

Fabrication and characterization of alginate-keratin based composite microspheres containing bioactive glass for tissue engineering applications, Supachai Reakasame, Rainer Detsch, Aldo R. Boccaccini, and Daniela Trapani (Abstract)

Laser-based 3D printing of hydrogel barrier models for microfludic applications, Aleksandr Ovsianikov, Peter Ertl, Mario Rothbauer, Sebastian Kratz, Maximilian Tromayer, Marica Markovic, Peter Gruber, Denise Mandt, Robert Liska, Sandra Van Vlierberghe, Jasper Van Hoorick, and Peter Dubruel (Abstract)

Suspended manufacture of biological structures, Megan Cooke, Sophie Cox, Simon Jones, Liam Grover, Samuel Moxon, Martyn Snow, Lee Jeys, and Alan Smith (Abstract)

Biocompatible micropatterning of o‐nitrobenzyl crosslinked hydrogels by sensitized two-photon cleavage, Peter Gruber, Aleksandr Ovsianikov, Robert Liska, Marica Markovic, Katja Hölz, Markus Lunzer, and Dmitri Ossipov (Abstract)

Inkjet printing technology and bio-ink development for the biofabrication of in vitro 3D tissues, Waka Lin, Shigeo Hatada, Aino Hasegawa, Shiomoto Shusaku, Shunpei Kamono, and Daisuke Takagi (Abstract)

Chondrogenic potential of chondrocytes in hyaluronic acid/PEG-based hydrogels is dependent on the hyaluronic acid concentration, Lotte Groen, J. Malda, D. Gawlitta, T. Vermonden, W.E. Hennink, A. Abbadessa, R. Levato, and V. H. M. Mouser (Abstract)

Convergence of printing technologies to engineer an interface between bone and cartilage, Paweena Diloksumpan, Miguel Castilho, Tina Vermonden, P. René van Weeren, Jos Malda, and Riccardo Levato (Abstract)