June 19 – 24, 2022
Irsee, Germany
| Editors: | Brian Hazel, Pratt & Whitney, USA |
|---|---|
| Uwe Schulz, German Aerospace Center, Germany | |
| Mike Maloney, Pratt & Whitney (retired), USA | |
| Robert Vassen, Research Center, Julich, Germany | |
| Ram Darolia, GE Aviation (retired), USA |
The articles for these proceedings are not peer-reviewed.
Conference Program, Brian Hazel, Uwe Schulz, Mike Maloney, Robert Vaβen, and Ram Darolia (Article)
Requirements and Design Constraints for TBC’s in Land Based Gas Turbines, Grégoire Witz, Arturo Flores Renteria, Jens-Erich Döring, Cora Hitchman, Roy Patgunarajah, Atin Sharma, Anirudha Vaidya, and Neil Hitchman (Abstract)
Successes, Challenges and Opportunities for Environmental Barrier Coatings, Julie Kuhn, Nicholas Antolino, Vidya Ramaswamy, Nathaniel Brown, and Mano Manoharan (Abstract)
New Environmental-Thermal Barrier Coatings for Ultrahigh Temperature Alloys, Ji-Cheng Zhao, Hua Xie, Wei Zhong, Liangbing Hu, Victor Champagne, David R. Clarke, and Yunhui Gong (Abstract)
High Temperature Refractory Metal Alloys-advances and Challenges, John Perepezko (Abstract)
High Entropy Rare Earth Oxide (HERO) Environmental Barrier Coatings for Refractory Metal Alloys, Elizabeth Opila, Prasanna Balachandran, Bi-Cheng Zhou, Patrick Hopkins, Carolina Tallon, and Jonathan Laurer (Abstract)
Selective Thermal Emission Coatings for Improved Turbine Efficiency, Pete McGrail, Bruce Bernacki, Charles Bonham, John Loring, Molly O’Connor, Todd Schaef, Jeromy Jenks, Darick Baker, and Ognjen Ilic (Abstract)
Assessing the High Temperature Performance of Refractory Metal Alloys, Bruce Pint and S. Dryepondt (Abstract)
EBC Development and Behaviour Analysis for High Temperature CMC Components, Lisa Pin and Simon Arnal (Abstract)
Concepts for Enhancing the Life of Environmental Coatings Systems, Jeroen Deijkers and Jeroen Deijkers (Abstract)
Processing and Characterization of Ytterbium Silicate Environmental Barrier Coatings, Ping Xiao, Ahmet Hilmi Paksoy, Esma Yilmaz, and Simon M cCormack (Abstract)
Damage Mechanism of an Environmental Barrier Coated Ceramic Matrix Composite Under Thermal and Mechanical Loadings, Thibaut Archer, Ines Hamadouche, Pierre Beauchêne, Thomas Vandellos, and François Hild (Abstract)
The Synthesis of EBC Layer Stacks by the Combination of PVD and CVD in a Continuous Vacuum Process, Jurgen Ramm, Dianying Chen, Max Döbeli, Kerstin Glaentz, Sébastien Guimond, Xavier Maeder, Helmut Schoech, and Benno Widrig (Abstract)
Stabilization Mechanism and CMAS Corrosion Behavior of Rare Earth Oxides Based Environmental Barrier Coatings Prepared by Thermal Spray, Naoki Yamazaki (Abstract)
Cyclic oxidation of yttrium/ytterbium disilicate environmental barrier coatings, Bruce Pint, M. Ridley, M. Sweet, M.J. Lance, and K. A. Kane (Abstract)
Factors influencing the performance of zirconia based thermal barrier coatings, Robert Vaβen, Jana Joeris, Olivier Guillon, and Daniel Emil Mack (Abstract)
A Coupled Thermal and Mechanical Analysis of Sintering in Thermal Barrier Coatings Under Gradient Exposure, John Saputo and Sanjay Sampath (Abstract)
A mechanism-based approach for assessing the structural integrity of plasma-sprayed multilayer thermal barrier coatings, Matthias Oechsner, Marcel Adam, and Christian Kontermann (Abstract)
Thermo-mechanical Analysis of Blister Damage in Eb-pvd Tbc System: Experiments and Modeling, Vincent Maurel, Lara Mahfouz, Vincent Guipont, Alain Köster, Basile Marchand, and Florent Coudon (Abstract and Presentation)
Degradation of aluminide type bondcoats due to oxidation and interdiffusion: effect of base alloy composition, Dmitry Naumenko, Wencai Leng, Rishi Pillai, Nanxi Zheng, and Marlene Grohne (Abstract)
Novel multicomponent equiatomic pyrochlores for future thermal barrier coatings, Maren Lepple and Patrick Hutterer (Abstract)
Microstructure, phase formation and cyclic behavior of PVD-based Y- silicate Environmental Barrier Coatings for SiC-SiC CMC, Uwe Schulz, Vito Leisner, and Ronja Anton (Abstract)
Multilayer TBCs and EBCs: Integrating Design and Manufacturing Innovations for Multifunctional Performance, Sanjay Sampath (Abstract)
Microstructure and Phase Composition Evolution of Thermal Sprayed Yb- Silicate Coatings during Post Heat Treatment and Burner Rig Test, Emine Bakan, Daniel E. Mack, Robert Vaßen, and Dapeng Zhou (Abstract)
Comparative Study of Thermal Barrier Coatings by S-hvof and Eb-pvd Process, Yoshifumi Okajima and Taiji Torigoe (Abstract)
Columnar Thermal Barrier Coatings Manufactured by Novel Laser Cladding Process, Daniel Mack, Christoph Vorkötter, Olivier Guillon, and Robert Vaßen (Abstract)
Thermal Barrier Coatings on Additive Manufactured Superalloy Parts, Nicolaie Markocsan (Abstract)
Plasma-activated EB-PVD of protective coatings: tools and processes, Burkhard Zimmerman, Gösta Mattausch, and Bert Scheffel (Abstract)
Investigating the microstructure of as-sprayed high-crystalline Yb2Si2O7 environmental barrier coating (EBC) deposited by atmospheric plasma spray (APS), Christian Moreau and Farzam Arhami (Abstract)
New Enhanced Technical Capabilities of the ALD SMARTcoater, Ole Hinrichs, Thorsten Hohmann, Dr. Andrzej Nowotnik, and Thomas Schösser (Abstract and Presentation)
Cathodic Arc Evaporation of MCrALY Coatings, Sebastien Guimond, Max Döbeli, Xavier Maeder, Toby Middlemiss, Jürgen Ramm, Lin Shang, and Benno Widrig (Abstract)
Simulations of Oxide Growth and Stress Evolution in Silicon-based Coatings and Composites, Matt Begley, Stephen Sehr, Virginia Collier, and Frank Zok (Abstract)
Micromechanical Testing of Thermal Barrier Coatings, Ying Chen, Ping Xiao, and Gyaneshwara Brewster (Abstract)
Assessment of Mechanical TBC Failure in Complex Geometries, Mario Rudolphi and Mathias C. Galetz (Abstract and Presentation)
Synthesis and characterization of compositionally complex zirconate and phosphates, Daniel Mumm (Abstract)
Future engine challenges for TBCs/EBCs, Frank Preli (Abstract)
E Understanding the Stability of Mixed-Anion Deposits and Effects on Reactions with Advanced Coating Materials, David Poerschke, Eeshani Godbole, and Atharva Chikhalikar (Abstract)
Reactions in Thermal Barrier Coatings and Multi-Mineral Dusts in a Gas Turbine Engine Dust Ingestion Test, Gyn Brewster, Daniel Everington, Rory Clarkson, Jacob Elms, Alison Pawley, João Martins, and Ping Xiao (Abstract)
A Geoscientific Perspective on Silicate Melt Interactions with TBCs, Dirk Müller, Kai-Uwe Hess, Ulrich Küppers, Donald B. Dingwell, Gerhard Wolf, Pawel Rokicki, and Andrzej Nowotnik (Abstract)
Understanding garnet phase stability in Gd/Y/Yb-CMAS systems and influences on multiphase T/EBC-CMAS interactions, Eeshani Paresh Godbole, Carlos G. Levi, Andrew R. Ericks, Collin S. Holgate, Frank W. Zok, and David L. Poerschke (Abstract)
Microstructure modification of EB-pvd gadolinium zirconate thermal barrier coatings and the effect on their resistance against siliceous CMAS melts, Christoph Mikulla, Ravisankar Naraparaju, Peter Mechnich, and Uwe Schulz (Abstract)
Mechanical properties of Yb2Si2O7 coatings prepared using electrophoretic deposition, Esma Yilmaz, Ahmet Hilmi Paksoy, and Ping Xiao (Abstract)
Simultaneous residual stress mapping of topcoat and TGO in APS TBC using combined micro-raman-PL spectroscopy, Srikanth Batna, G. Siva Kumar, and Ashutosh S. Gandhi (Abstract)
Understanding Silicate Deposit Variability and its Implications for Evaluating TBCs and EBCs, Andrew Ericks, Carlos G. Levi, Collin S. Holgate, Frank W. Zok, and David L. PoerschkePlease click Additional Files below to see the full abstract. (Abstract)
CMAS Reactive Coatings for TBCs, Margeaux Wallace, Jose Sanchez, Hrishikesh Keshavan, Ambarish Kulkarni, Nicole Piche, Julie Kuhn, Byron Pritchard, Mehmet Dede, and Bernard Bewlay (Abstract)
Development of CMAS Resistant Thermal Barrier Coatings: Challenges and Implications, Ravisankar Naraparaju, C. Mikulla, L. Steinberg, Peter Mechnich, Uwe Schulz, Z. Stein, S. Raghavan, and L. Tetard (Abstract)
Corrosion of E/TBCs: Chemical Interactions of Ceramic Materials with CMAS, Pierre-Jean Panteix; Michel Vilasi,; Justine Bonnal; Tuti Katrina Abdullah; François Perrudin; Eric Schmucker; Victor Szczepan; Stephane Mathieu; Carine Petitjean; and Pierre-Jean Panteix (Abstract)
Influence of alumina addition on steam corrosion behaviour of Ytterbium disilicates for EBC applications, Ahmet Hilmi Paksoy, João P. Martins, Huatang Cao, Ping Xiao, Ying Chen, and Grant Gibson (Abstract)
Reactions of rare earth hafnates and zirconates with silicate melts of different basicity, Andrew R. Ericks, Carlos G. Levi, and Frank W. Zok (Abstract)
Debye-Larmor high enthalpy cascade plasma gun technology to apply ceramic coatings for the turbine industry, Armando Salito, Geoffrey Darut, Marie Pierre Planche, Christian Adam, Manfred Rösli, Hanlin Liao, Claus-Daniel Armbruster, and Marco Reinger (Abstract)
TUBA Nova - A novel industrial EB-PVD coater platform for state-of-the-art TBCs and multi-layer coatings, Carsten Deus, Lutz Gottsmann, Steffen Berger, Susann Puppe, Anika Himmler, and Martin Seifert (Abstract)
Investigating the microstructure of as-sprayed high-crystalline Yb2Si2O7 environmental barrier coating (EBC) deposited by atmospheric plasma spray (APS), Christian Moreau and Farzam Arhami (Abstract)
Microstructure modification of EB-pvd gadolinium zirconate thermal barrier coatings and the effect on their resistance against siliceous CMAS melts, Christoph Mikulla, Ravisankar Naraparaju DLR, Peter Mechnich DLR, and Uwe Schulz DLR (Abstract)
Thermal Environmental Barrier Coatings (TEBCs), and their deposits-induced degradation and Its mitigation, Christopher Louzon and Nitin P. Padture (Abstract)
Synthesis of multi component rare-earth silicate systems for T/EBC application: Study of their high temperature interactions with CMAS, Cynthia Yanel Guijosa Garcia, Peter Mechnich, Ravisankar Naraparaju, and Uwe Schulz (Abstract)
Environmental barrier coatings deposited by suspension plasma spraying, Dapeng Zhou and Robert Vaßen (Abstract)
Understanding garnet phase stability in Gd/Y/Yb-CMAS systems and influences on multiphase T/EBC-CMAS interactions, Eeshani Paresh Godbole and David Poerschke (Abstract)
Mechanical properties of Yb2Si2O7 coatings prepared using electrophoretic deposition, Esma Yilmaz, Ahmet Hilmi Paksoy, and Ping Xiao (Abstract)
Ytterbium silicate environmental barrier coatings prepared by a novel slurry spraying- reactive sintering technique, Gauri Waghmare and Ashutosh S. . Gandhi (Abstract)
Concepts for enhancing the life of environmental coatings systems, Jeroen Deijkers and Haydn Wadley (Abstract)
Coatings for increased efficiency in compression ignition engines, John Saputo, Carl Schmidt, Sanjay Sampath, Felipe Caliari, Eric Gingrich, and Michael Tess (Abstract)
A coupled thermal and mechanical analysis of sintering in thermal barrier coatings under gradient exposure, John Saputo and Sanjay Sampath (Abstract)
Effects of EB-PVD microstrural features on CMAS infiltration of Yttria-rich zirconia coatings, Juan Gomez, Ravisankar Naraparaju, Ramana V. Chintalapalle, and Uwe Schulz (Abstract)
Thermochemical stability of high entropy rare earth oxide (HERO) coatings for refractory alloys, Kristyn Ardrey, Elizabeth Opila, Bicheng Zhou, Prasanna Balachandran, Patrick Hopkins, Carolina Tallon, and Jonathan Laurer (Abstract)
Spatially resolved characterization of thermally grown oxides using time-domain thermoreflectance, Milena Milich and Patrick Hopkins (Abstract)
Emerging coating materials for H2 powered turbines, Molly O'Connor (Abstract)
A study of the of ytterbium disilicates undergoing water vapour corrosion for environmental barrier coating applications, Simon McCormack, Philip J. K Withers, and Ping Xiao (Abstract)
Simultaneous residual stress mapping of topcoat and TGO in APS TBC using combined micro-raman-PL spectroscopy, Srikanth Batna, G. Siva Kumar, and Ashutosh S. Gandhi (Abstract)
Lessons learned in design and characterization of EBC spray powders, Ursa Pirnat, Richard Trache, and Karl Körner (Abstract)
A comparative study of phase evolution in YSZ powders, pellets and free-standing air plasma sprayed thermal barrier coatings, Vikram Hastak, Edward J. Gildersleeve, Sanjay Sampath, and Ashutosh S. Gandhi (Abstract)
SiC-based/EBC Coating systems investigated by LASAT (LAser Shock Adhesion Test), Vincent Guipont, Julie Chalony, Vincent Maurel, Melvin Le Nevé, Emine Bakan, Robert Vaßen, Dietmar Koch, Thomas Vandellos, and Thomas Philippe (Abstract)
Non-destructively capturing CMAS degradation of EB-PVD thermal barrier coatings through 3D confocal Raman renderings, Zachary Stein, Ravisankar Naraparaju, Uwe Schulz, Laurene Tetard, and Seetha Raghavan (Abstract)
The utilization of laser thermal testing with thermographic measurement for TBC lifetime performance evaluation, Zdeněk Veselý, Milan Honner, Matěj Hruška, and Petra Honnerová (Abstract and Presentation)