Thermal and Environmental Barrier Coatings VII

Follow

index

PDF

25 conference program - Thermal and Environmental Barrier Coatings VII, Bruce Pint, Elizabeth Opila, Brian Hazel, Uwe Schulz, Robert Vaßen, Arturo Flores-Renteria, Bryan Harder, and Ram Darolia (Article)

 

Environmental barrier coatings: Bridging the gap from laboratory to engine, Ann Bolcavage (Abstract)

 

Air plasma spraying of thermal-environmental barrier coatings for future ceramic turbine components, Edward Gildersleeve, Emine Bakan, and Robert Vaßen (Abstract)

 

Manufacture and testing of advanced environmental barrier coatings, Robert Vaßen, Emine Bakan, Ed Gildersleeve, Daniel Emil Mack, and Olivier Guillon (Abstract)

 

GE Aerospace experience with environmental barrier coatings, Nate Brown, Glen Kirby, Julin Wan, and Reza Sarrafi-Nour (Abstract)

 

Operation conditions of thermal barrier coatings for reliable stationary gas turbines, Arturo Flores Renteria and Grégoire Witz (Abstract)

 

Development and application of the advanced thermal barrier coating for 1650°C Class JAC Gas Turbine, Taiji Torigoe and Yoshifumi. Okajima (Abstract)

 

Xenotime rare Earth orthophosphates as EBC candidate materials, Elizabeth Opila, Imoen Hawthorne, Will Riffe, and Patrick Hopkins (Abstract)

 

Interface design for multilayer, rare earth-rich thermal/environmental barrier coatings, David Poerschke and Eeshani Godbole (Abstract)

 

Environmental barrier coatings on silicon nitride combustors for reverse flow reactor applications, Charlie Chun (Abstract)

 

Pushing the boundaries of YSZ TBCs and development of novel TBC systems for UHT application, Mario Rudolphi,; Büsra Prill; and Mathias C. Galetz (Abstract)

 

Interpenetrating composite EBCs for oxygen-rich turbomachinery, Zach Cordero (Abstract)

 

Influence of cationic parameters on phase formation and properties of high entropy zirconates, Maren Lepple, Giulia Bianchi, Manuel Schenker, Jonas J. Pflug, and Patrick Hutterer (Abstract)

 

Complex interactions between silicate melts and thermal/environmental barrier coatings, Carlos Levi (Abstract)

 

Development of a CMAS resistant EBC for CMC, Takeshi Nakamura, Naoki Yamazaki, Kohei Doi, Satoshi Kitaoka, and Hideki Kakisawa (Abstract)

 

Technologies to mitigate the CMAS concern, Jason Van Sluytman, Sarah Lowum, Vladimir Tolpygo, Josh Smetzer, and KJ Meisner (Abstract)

 

Degradation of various columnar thermal barrier coatings under thermal gradient cyclic testing with simultaneous CMAS attack, Daniel Mack, Gyn Brewster, Robert Vaßen, and Olivier Guillon (Abstract)

 

Understanding and modeling CMAS infiltration of a thermal barrier coating under thermal gradients, Thomas Brunet, Thibaut Archer, Alice Dolmaire, and Michel Vilasi (Abstract)

 

Biomimetic super molten silicate phobicity of ceramic material, Wenjia Song and Donald B. Dingwell (Abstract)

 

Thermal radiation barrier coatings for gas turbines, David Clarke (Abstract)

 

Investigating the effect of increased TBC optical absorption in a lab-scale scramjet combustion facility, Ken Kane, Bob Rockwell, Michael Brupbacher, Gehn Ferguson, Dajie Zhang, and Karun Kumar Rao (Abstract)

 

Radiative versus conductive heat transfer through coatings, Georgios Koutsakis (Abstract)

 

Universal trends in high temperature spectral emissivity of rare earth oxide-based materials for radiation barriers, Patrick Hopkins, Prasanna Balachandran, Haydn Wadley, and David Clarke (Abstract)

 

Combined environmental failure mechanisms and durability in EBCs, Bryan Harder, Michael J. Presby, Jamesa L. Stokes, and Leland C. Hoffman (Abstract)

PDF

Microstructural and interfacial analysis of Yb2Si2O7 based coatings under varied steam conditions, Daniel Scotson, Daniel Scotson, Esma Yilmaz, and Ping Xiao (Abstract and Presentation)

 

Environmental barrier coated CMC behavior under individual and combinations of thermal, mechanical and physicochemical loadings, Thibaut Archer and Thomas Vandellos (Abstract)

 

Degradation & failure evaluation of EBCs under adverse operational environment: multi-physics modelling, Kuiying Chen and Kang Lee (Abstract)

 

Principle & applications for thermal history mapping on thermal & environmental barrier coated gas turbine components, Joseph Counte, Silvia Araguas-Rodriguez, Jörg P. Feist, Tanvir Hussain, and John R Nicholls (Abstract)

 

Manufacturing science of layered, multifunctional coatings, Sanjay Sampath (Abstract)

PDF

Cord Plasma Spray (CPS): A new and industry-oriented process for advanced TBCs, Dominique Billieries, Dr. Geoffrey CELESTE, Prof. Shrikant JOSHI, and Mr. Stefan BJÖRKLUND (Abstract and Presentation)

 

Environmental barrier coatings for SiC-SiC CMC components by Magnetron Sputtering and EB-PVD, Uwe Schulz, Andrea Ebach-Stahl, Cynthia Y. Guijosa-Garc, Ronja Anton, and Ravisankar Naraparaju (Abstract)

 

Oxidation resistant cathodic arc PVD MCrAlY coatings, Carmen Jerg, Juergen Ramm, and Jonathan Gutleber (Abstract)

 

Impact of process on EBC coating performance, Lisa Pin (Abstract)

 

Colloidal behavior of rare earth disilicate suspensions, Glen Kirby (Abstract)

 

Sensitivity of TBC to thermo-mechanical fatigue loading including through thickness gradient (TGMF), Vincent Maurel; Vincent Guipont; Emna Ben Romdhane; Matthieu Rambaudon; Basile Marchand; and Lara Mahfouz,Florent Coudon (Abstract)

 

Lifetime assessment of TBCs: On the evolution of ONERA's energetic approach under thermal gradient conditions, Matthieu Nicol, Pascale Kanouté, Damien Bautista, Thibaut Archer, Alice Dolmaire, and Olivier Voreux (Abstract)

 

Experimental testing and characterization of materials at extreme temperatures at and above 2,000°C, Kevin H emker, Syed I.A. Jalali, Sharon Park, and Michael Patullo (Abstract)

 

Raman and photoluminescence spectroscopic condition monitoring of high temperature protective coatings, Ashutosh Gandhi, Srikanth Batna, Vikram Hastak, and Gauri Waghmare (Abstract)

 

Materials research strategy to support low-carbon fuels and the energy transition, Alex Bridges (Abstract)

 

Optimized microstructures for improved TBC sintering resistance for use with hydrogen fuels, Margeaux Wallace, Grace Falanga, Caitlin Lambrecht, Scott Smith, Ryan Jacobs, Mike Knussman, Jose Sanchez, Najafa Islam, Andrea Vozar, Josh Margolies, and Roger Ghanem (Abstract)

 

High temperature oxidation behavior of TBC coated Ni-based super alloys under hydrogen combustion atmospheres, Ravi Naraparaju, Andrea Ebach-Stahl, and R. Ambekar (Abstract)

 

EB-PVD coating by Von Ardenne, Robert Ostanin (Abstract)

 

Investigation of residual strains in Environmental Barrier Coatings using Neutron Bragg Edge Radiography UK ISIS Neutron Facility, Shivansh Nauriyal, Xiao Su, Ranggi Ramadhan, Genoveva Burca, Jun Shi, and T. James Marrow (Abstract)

PDF

From single- to multicomponent system: CMAS corrosion of rare-earth zirconates, Jonas Johannes Pflug and Maren Lepple (Abstract and Presentation)

PDF

High-entropy oxides as new thermal barrier coatings: First investigations of their potential, Manuel Schenker, Patrick Hutterer, and Maren Lepple (Abstract and Presentation)

PDF

ZrO2-HfO2-Y2O3-Ta2O5 system: Thermodynamic investigations of a promising materials system for thermal barrier coating applications, Alina Habermann and Maren Lepple (Abstract and Presentation)

PDF

High-entropy oxides: crystal structures and thermophysico-chemical properties of promising thermal barrier coating materials, Giulia Bianchi and Maren Lepple (Abstract and Presentation)

PDF

Tweaking CMAS wettability by laser-induced surface modifications of thermal barrier coatings, Emilie Lam, Alice Dolmaire, Lucille Desprès, Aurélien Sikora, Laura Gemini, Aurélie Julian-Jankowiak, and Alan Kéromnès (Abstract and Presentation)

 

Influence of cation size on Calcium-Magnesium-Aluminosilicate interactions with binary rare Earth disilicate coatings, Laura Doumaux, Robert Golden, and Elizabeth Opila (Abstract)

PDF

Characterization and CMAS corrosion resistance of YbMS and YbDS multilayered EBCs, Margherita Cescon, Stefania Morelli, Giovanni Bolelli, Laura Silvestroni, Dariia Chernomorets, Giovanni Pulci, Francesco Marra, and Laura Paglia (Abstract and Presentation)

 

Key components for combined electron beam and plasma T/EBC processes, Burkhard Zimmermann and Gösta Mattausch (Abstract)

PDF

Investigation of SPS YSZ TBC with Pt rich γ/γ' bondcoats using Laser Shock Adhesion Test (LASAT), Eliott Degouilles, Vincent Guipont, Vincent Maurel, Filofteia-Laura Toma, Radoslaw Swadzba, Boguslaw Mendala, Lucjan Swadźba, and Lukasz Pyclik (Abstract and Presentation)

 

Molten silicate interactions with YAG-YAP thermal/environmental barrier coatings, Scott Berens, Collin S. Holgate, Carlos G. Levi, and Frank W. Zok (Abstract)

 

Crystal structure changes during production of ytterbium disilicate for EBCs, Andres Carrasco, Ursa Pirnat, and Richard Trache (Abstract)

 

Development of novel multicomponent materials as ultrahigh temperature thermal barrier materials, Sairam Ramachandran and Ashutosh S. Gandhi (Abstract)

 

The effects of chemistry and microstructure on the high-temperature capabilities of a refractory complex concentrated alloy, Mark Weaver and Mark Weaver (Abstract)

 

Mechanical and microstructural characterization of 7YSZ TBC, Matthew Engquist, Syed I.A. Jalali, Mo Rigen-He, Nadia Rohbeck, Jalil Alidoost, Elisa Zaleski, Brian Hazel, Robert Hutchinson, and Kevin Hemker (Abstract)

 

Collapse characteristics and deposition behaviour of PS–PVD powders with different crushing strengths, Li-kang Liang, Yu-sheng Zhang, Xiao-Ming You, and Qing He (Abstract)

 

Failure testing of monolithic and multi-layered TBC systems, Aidan Donnelly and Sanjay Sampath (Abstract)

 

Testing of thermal and environmental coatings under water vapor, Sara Catalina Pineda Heresi, Daniel Emil Mack, Robert Vaßen, and Emine Bakan (Abstract)

 

High resolution structural and compositional characterization of a Thermal Barrier Coating, Prerna Sudera, Alice Scarpellini, Bart Winiarski, Charlie Chandler, Tim Nunney, Dhilan Devadasan, and Herman Lemmens (Abstract)

PDF

Coupling microstructure and stress evolution of steam oxidised EBCs, Daniel Scotson, Ahmet Hilmi Paksoy, Esma Yilmaz, and Ping Xiao (Abstract and Presentation)

 

Effect of microstructure on thermal cycling and CMAS corrosion behavior of (Gd0.9Yb0.1)2Zr2O7/YSZ thermal barrier coatings prepared by EB-PVD, Chengyang Jiang (Abstract)

PDF

Investigating thermal and optical properties in rare earth zirconates for radiative barrier coatings, William Riffe (Abstract and Presentation)

 

Revolutionizing thermal barrier coating processes: laser cleaning for enhanced substrate preparation and tbc removal, Dmitri Novikov (Abstract)

 

Characterisation of the damage mechanisms of a thin YbDS EBC for CMC applications: from standard tests to conditions close to the engine environment, Louane Ronteix, Florent Mauget, Nicolas Guel, Yannick Pannier, Thomas Vandellos, and Jonathan Cormier (Abstract)

 

The impact of YSZ powder morphology on Segmented-TBC single and multilayer systems, Alessandro Lanzi, Simone Bursich, Andrea Scrivani, and Stefan Zimmermann (Abstract)

PDF

Plasma assistance for enhanced microstructures of EB-PVD coatings, Thorsten Hohmann, Björn Sehring, and Ole Hinrichs (Abstract and Presentation)

 

Collapse characteristics and deposition behaviour of PS–PVD powders with different crushing strengths, Yusheng Zhang, Li-kang Liang, Qing He, and Xiao-Ming You (Abstract)

 

High temperature oxidation of diffusion Pt-γ/γ' and Pt-aluminide coatings at 1200 °C, Radosław Swadźba, Agnieszka Sasiela, Bogusław Mendala, Lucjan Swadźba, Łukasz Pyclik, and Michał Gut (Abstract)

PDF

CMAS infiltration measurement method (CIMM), Koldo Almandoz Forcen, Christine Chalk, Daniel E. Mack, Ruhr-Universität Bochum, Robert Vaßen, Gyaneshwara J. Brewster, Luis Isern Arrom, and John R. Nicholls (Abstract and Presentation)

 

Development of Environmental Barrier Coatings via Pvd techniques: Evaluation under High Temperature Water Vapor, Cynthia Yanel Guijosa Garcia, Peter Mechnich, Ravisankar Naraparaju, and Uwe Schulz (Abstract)

 

Laser shock for damage monitoring in Thermal Barrier Coatings applied to laser rig, Alice Dolmaire, Rami El Hourany, Basile Marchand, Vincent Maurel, Vincent Guipont, Thibaut Archer, Matthieu Nicol, Olivier Voreux, Lara Mahfouz, and Florent Coudon (Abstract)

 

Development of an EBC for hydrogen combustion aeronautical engines, Adeba Charles Ezanin, Louise Sevin, Thibaut Archer, Pierre Bertrand, and Johan Petit (Abstract)