September 29-October 4, 2019
Melia Costa Del Sol
Malaga, Spain
| Editor: | Jon Molina-Aldareguia, IMDEA-Materials Institute, Spain |
|---|
The articles for these proceedings are not peer-reviewed.
Evaluation of tensile properties using instrumented indentation technique for small scale testing, Jongho Won, Oh Min Kwon, Seung Ha Lee, and Dongil Kwon (Abstract)
Measuring the fracture energy of WC grain boundaries, Max Emmanuel, G. Sernicola, B. Britton, and F. Giuliani (Abstract)
Wear mechanism of olivine at the small-scale: An in situ TEM study, Ude Hangen, Eric Hintsala, Douglas Stauffer, and S. A. Syed Asif (Abstract)
On the use of nano-indentation for tensile property correlation of ferrous metals, Ana Ruiz Moreno, Ana Ruiz Moreno, Francesco Fumagalli, and Lyubomira Veleva (Abstract)
Addressing the impact of fracture during indentation of molecular crystals, Alexandra C. Burch, John Yeager, and David Bahr (Abstract)
Gallium-free micromechanical sample preparation from ECAPed alluminium, Hana Tesařová, Petr Klímek, Manuel Bornhoefft, Jiří . Dluhoš, Hana Tesařová, and Jaromír Kopeček (Abstract)
The influence of pre-deformation on the fracture toughness of chromium, studied by microcantilever bending, Stefan Gabel, Benoit Merle, Mathias Göken, and Erik Bitzek (Abstract)
Deformation and failure of microscale mechanical metamaterials, Chantal Miriam Kurpiers and Ruth Schwaiger (Abstract)
In situ fragmentation analysis of ALD-PVD multilayers on flexible substrates, Barbara Putz, Xie Tianle, Thomas Edwards, Xavier Maeder, Johann Michler, and Laszlo Petho (Abstract)
Exploring the mechanical character of molybdenum grain boundaries via nanoindentation and three-point-bending, Severin Jakob, Alexander Leitner, Alexander Lorich, Michael Eidenberger-Schober, Wolfram Knabl, Reinhard Pippan, Helmut Clemens, and Verena Maier-Kiener (Abstract)
Investigation of a high angle grain boundary in Fe2.4wt.%Si BCC micropillars, Martin Heller, James Gibson, and Sandra Korte-Kerzel (Abstract)
Multi-mechanical in situ testing for automotive industry DLC/interlayer/M2-Steel coatings, Sergio Sao Joao, Jihane Benmohamed, Christophe Héau, and Christophe Donnet (Abstract)
Role of film microstructure on interface stability: in-situ and ex-situ investigations, Alice Lassnig, Christoph Gammer, Daniel Kiener, Christian Mitterer, and Megan J. Cordill (Abstract)
High frequency acoustic emission monitoring in nano-impact of bulk ceramics, Ben D. Beake, Adrian Harris, Alberto Sanchez Martin, Radim Ctvrtlik, Jan Tomastik, Lucas Vekaclav, Michal Hanak, and Petr Abrham (Abstract)
Microscale fracture of chromia scales, Anand H. S. Iyer, Gaurav Mohanty, Krystyna Stiller, Johann Michler, and Magnus Hörnqvist Colliander (Abstract)
Ni-P: Microstructure and micro-compression, Chaowei Du, Kurt Matoy, Johannes Zechner, Michael Reisinger, Werner Robl, Robert Hartl, Christoph Kirchlechner, and Gerhard Dehm (Abstract)
Influence of transition metals on the solid solution strengthening and creep behavior of Nickel studied by ultra-high temperature nanoindentation testing, Christian Minnert and Karsten Durst (Abstract)
Microstructure and high temperature mechanical properties of hard TaSiN coatings, Miguel A. Monclus, Lingwei Yang, Ignacio López-Cabañas, Raquel González-Arrabal, Efstathios I. Meletis, Jon M. Molina-Aldareguía, and Javier Llorca (Abstract)
Influence of alloying elements on the mechanical properties, especially fracture toughness, of the WB2-z base system, Rainer Hahn; Christoph Fuger; Vincent Moraes; Hamid Bolvardi; Oerlikon Balzers; Peter Polcik; Paul H. Mayrhofer,; and Helmut Riedl (Abstract)
Stress-strain curves and derived mechanical parameters of P91 steel from spherical nanoindentation at a range of temperatures, Ana Ruiz Moreno, Peter Hähner, Francesco Fumagalli, Vendulka Haiblikova, Marcello Conte, and Nicholas Randall (Abstract)
Grain boundary-based plasticity mechanisms in nanostructured metals, Romain Gautier, Marc Legros, and Christophe Coupeau (Abstract)
The influence of surface roughness on elastic nanoindentation measurements, Wieland Heyn, Malgorzata Kopycinska-Müller, André Clausner, Johannes Zechner, and Ehrenfried Zschech (Abstract)
The smallest macroscale tensile test - a model to describe constrained flow at the microscale, Hi T. Vo, Evan Still, Kiet Lam, Aljaž Drnovšek, Laurent Capolungo, Stuart Maloy, Peter Chou, and Peter Hosemann (Abstract)
New instrumentation and analysis methodology for nano-impact testing, Mario Rueda-Ruiz, Ben D. Beake, and Jon M. Molina-Aldareguia (Abstract)
Modulus and hardness determination using instrumented nanoindentation tests – How reliable are the results?, Dennis Bedorf, Martin Knieps, Wolfgang Stein, and Daniel Habor (Abstract)
Quantitative percussion diagnostics for detecting ultrafine cracks, James Earthman (Abstract)
DMA Dynamic characterization of viscoelastic solids by AFM: The nano DMA mode, Ude Hangen, Bede Pittenger, and Michel Fajfrowski (Abstract)
One million indents, a hardness (and modulus) story, Ude Dirk Hangen, Jacob Noble, Bernie Becker, and Douglas D. Stauffer (Abstract)
Fatigue damage in Ag nanowire networks, Chongguan Liu, William Sampson, and Brian Derby (Abstract)
Graphene effect on mechanical response of copper film, Farzaneh Bahrami, Marc Fivel, Mohammed Wasil Malik, Benjamin Huet, Mohamed Hammad, Hosni Idrissi, Jean-Pierre Raskin, and Thomas Pardoen (Abstract)
Hydrogen effects on nanomechanical behavior of additively manufactured 316L stainless steels, Jeong-Min Park, Young-Mo Ku, Guanghui Yang, Y. Morris Wang, Jin-Yoo Suh, and Jae-il Jang (Abstract)
Influence of annealing temperature on the mechanical properties of carbon supersaturated TaW coatings, Stefan Fritze, Barbara Osinger, Lars Riekehr, and Ulf Jansson (Abstract)
Micro-nano scale characterization of thermally treated single basalt fibres, Edoardo Rossi, Sebastiani M, Moscatelli R, Lilli M, Sarasini F, Valente T, Tirillò J, and Bemporad E (Abstract)
The influence of reinforcing nano-particles on indentation size effect and microhardness of metallic materials, Miriam Kupková and Martin Kupka (Abstract)
Exploring size effects in copper-chromium-zirconium using indentation techniques and in-situ micro-pillar compression, Alexandra J. Cackett, Hi Vo, Peter Hosemann, Chris Hardie, and Andy Bushby (Abstract)
In situ nanocompression tests in an environmental TEM to study plasticity of cerium oxides, Rongrong Zhang, Lucile Joly-Pottuz, Thierry Epicier, Manuel Cobian, Tristan Albaret, Douglas D. Stauffer, and Karine Masenelli-Varlot (Abstract)
Highly-stretchable and water impermeable thermally-grown silicon dioxide thin film with wavy structures, Na-Hyang Kim, Hangeul Kim, and Ju-Young Kim (Abstract)
Effect of anisotropic elasticity on dislocation pile-ups at grain boundaries, Xiaolei Chen, Stéphane Berbenni, Christian Motz, and Thiebaud Richeton (Abstract and Presentation)
Nano-mechanical behavior of ultra-stable amorphous metallic thin films, Jeong-Hyun Woo, Sun-Young Park, and Ju-Young Kim (Abstract)
The impact of twin boundary migration on mechanical performance of magnesium, Mohammadhadi Maghsoudi, Markus Ziehmer, and Erica T. Lilleodden (Abstract)
Effect on Nanoindentation in La2O3-reinforced W and W–V alloys produced by hot isostatic pressing, Javier Martínez-Gómez, Begoña Savoini, and Ramiro Pareja (Abstract)
From mirco-mechanical properties to tribological performance, Jona Engel and Ralph Spolenak (Abstract)
Influence of densification on the indentation cracking behaviour, Karsten Durst, Sebastian Bruns, T. Uesbeck, S. Fuhrmann, L. Wondraczek, D. de Ligny, Laszlo Petho, Christian Minnert, and Johann Michler (Abstract)
Identification of residual stress directionality using anisotropic indenter in instrumented indentation testing, JunSang Lee, Jong-hyoung Kim, and Dongil Kwon (Abstract)
Measurement of Young’s modulus of thin SmS films by Nanoindentation and surface acoustic wave, Francois De-Luca, Huixing Zhang, Mark Stewart, Ivan Rungger, Philippe Smet, Andreas Sousanis, Dirk Poelman, and Mark Gee (Abstract)
Atomic arrangement and mechanical properties of chemical vapor deposited amorphous boron, Jessica M. Maita, Gyuho Song, Mariel Colby, and Seok-Woo Lee (Abstract)