October 2 – 7, 2022
Split, Croatia

Chair:   Sandra Korte-Kerzel, RWTH Aachen University, Germany

The articles for these proceedings are not peer-reviewed.

Follow

 

Three-dimensional characterization of damage in dual phase steels with deep learning, Setareh Medghalchi, Ehsan Karimi, Ulrich Kerzel, and Sandra Korte-Kerzel (Abstract)

 

Slip and deformation behavior in intermetallic Cobalt-Samarium phases, Tobias Stollenwerk, Zhuocheng Xie, Navid Shayanfar, Konstantin Skokov, Sandra Korte-Kerzel, Oliver Gutfleisch, and Pei-Ling Sun (Abstract)

 

Nanoindentation induced reversible plasticity detected by acoustic emission, Jaroslav Cech, Radim Čtvrtlík, Petr Haušild, Jan Tomáštík, and Lukáš Václavek (Abstract)

 

Hydrogen induced hardening effect and the diffusion behavior in bcc Fe-Cr alloys by in situ nanoindentation, Maria Jazmin Duarte Correa, Subin Lee, Chun-Hung Wu, Binhan Sun, Michael Rohwerder, Gerhard Dehm, and María Jazmin Duarte (Abstract)

 

Quantitative measurement of stress vs. strain in supported thin films by the layer compression test, Aaron D. Sinnott (Abstract)

 

Microshear mechanical properties measurements on tribolayers, Fadlallah Abouhadid, Guillaume Kermouche, Sergio Sao-Joao, and Gaylord Guillonneau (Abstract)

 

How do H/E and H3/E2 control coating system wear? - Insights gained from elevated temperature nanoindentation, scratch and impact tests, Ben D. Beake (Abstract)

 

Fatigue behavior of gold thin films at elevated temperatures studied by bulge testing, Anna Krapf, Megan Cordill, David Gebhardt, and Benoit Merle (Abstract)

 

Development of protocols to quantify the twinning stress of a CoCrFeMnNi high entropy alloy108, Camila Aguiar Teixeira, Subin Lee, and Christoph Kirchlechner (Abstract)

 

Measurement of hardness and elastic modulus by depth sensing indentation: Improvements to the technique based on continuous stiffness measurement, Warren C. Oliver, P. Sudharshan Phani, and G.M. Pharr (Abstract)

 

Plasticity of the CaAl2 phase and its change with Mg addition at room temperature, Martina Freund, Doreen Andre, Carl Kusche, Sandra Korte-Kerzel, and Pei-Ling Sun (Abstract)

 

In-situ micromechanical testing of Su-8 polymer at high strain rates using indentation and micropillar compression, Rahul Cherukuri, Aloshious Lambai, Lassi Sukki, Pasi Kallio, and Gaurav Mohanty (Abstract)

 

High strain rate testing of ultra fine grained aluminium at micro and macro length scales112, Aloshious Lambai, Jari Kokkonen, Mikko Hokka, Veli-Tapani Kuokkala, and Gaurav Mohanty (Abstract)

 

A geometry for quantitative analysis of interface fracture at the micron scale, Eloho Okotete, Subin Lee, Gerhard Dehm, Steffen Brinckmann, and Christoph Kirchlechner (Abstract)

 

Mechanical behavior of optimized optical nanomultilayers, Danielle White, Edoardo Rossi, Marco Sebastiani, and Andrea M. Hodge (Abstract)

 

Development of novel indentation-based stress relaxation tests to study transient plasticity in metals, Suprit Purushottam Bhusare, Aloshious Lambai, Jakob Schwiedrzik, Johann Michler, and Gaurav Mohanty (Abstract)

 

Unveiling the mechanisms of motion of synchro-Shockley dislocations in Laves phases, Zhuocheng Xie, Dimitri Chauraud, Achraf Atila, Erik Bitzek, and Sandra Korte-Kerzel (Abstract)

 

The restructuring of grain boundaries at the surfaces of meals, John J. Boland and Xiaopu Zhang (Abstract)