November 13 – 18, 2022
Santa Fe, New Mexico, USA
Chair: Ram Darolia, GE Aviation, USA
| Co-Chairs: | Jon Binner, University of Birmingham, United Kingdom |
|---|---|
| Yutaka Kagawa, Tokyo University of Technology, Japan | |
| Dietmar Koch, University of Augsburg, Germany | |
| Rishi Raj, University of Colorado, USA | |
| Gerard Vignoles, University of Bordeaux, France |
| Conference Secretaries: | Ken Goto, Japan Aerospace exploration agency (JAXA), Japan |
|---|---|
| Satoshi Kitaoka, Japan Fine Ceramics, (JFCC), Japan |
The articles for these proceedings are not peer-reviewed.
Ceramic Matrix Composites II: Science and Technology of Materials, Design, Applications, Performance and Integration, Ram Darolia, Rishi Raj, Yutaka Kagawa, Jon Binner, Dietmar Koch, and Gerard Vignoles (Article)
Ceramic Matrix Composites (CMCs) at GE: From inception to commercialization, Krishan Luthra and James S. Vartuli (Abstract)
Industrialization of ceramic matrix composites for aerospace applications, Mano Manoharan (Abstract)
Development of ceramic matrix composites for 2500°F turbine engine applications, Olivier Sudre (Abstract)
Brief overview of CMCs engine components experiments coupled with representative sub-element tests, Eric Bouillon and Sebastien Denneulin (Abstract)
Multi-scale study of ceramic composite materials for aeronautical applications, Sébastiene Denneulin and Eric Bouillon (Abstract)
SiCf/SiC ceramic matrix composite – A turbine engine perspective, Thomas Nixon (Abstract)
Development of CMC for nuclear fuel components, Toshiki Nishimura, Shoko Suyama, Toshiaki Takada, and Masaru Ukai (Abstract)
International reliability assessment project through standard PateranoSiC(SiC/SiC), Chikara Fujiwara and Michio Takeda (Abstract)
Overview of CMC activities: From high temperature characterization to applications, Guillaume Pujol and Philippe Gomez (Abstract)
Industrial application of all oxide ceramic matrix composites, Walter Pritzkow (Abstract and Presentation)
Advances and technical challenges in development of CMC, Takeshi Nakamura, Hiroto Hirano, Masahiro Kotani, and Naoki Yamazaki (Abstract)
Current trends in CMC research & development across DLR’s technology programs, Peter Mechnich, Michael Welter, and Linda Klopsch (Abstract)
Multiphysics modeling of ceramic-matrix composites processing by thermal-gradient chemical vapor infiltration, Gerard Vignoles, Cedric Descamps, Carole Charles, and Gaëtan Mangeon (Abstract)
In-situ observation and multi-physics simulation of reactive melt Infiltration of silicon melt into SiC-C Preform, Takeshi Yoshikawa, Hisao Esaka, Kazuki Morita, and Takahiro Sekigawa (Abstract)
Processing and characterization of layered UHTCMCs reinforced with continuous or discontinuous carbon fibers, Antonio Vinci, Antonio Vinci, Pietro Galizia, Luca Zoli, Laura Silvestroni, and Matteo Mor (Abstract)
Processing, performance and process modeling of preceramic polymers, Thomas Key, Garth Wilks, and Michael Cinibulk (Abstract)
Effect of matrix porosity and prepreg-tack on mechanical properties and processing of oxide ceramic matrix composites, Stefan Schafföner, Lukas Wagner, Georg Puchas, and Felix Lindner (Abstract)
CVI manufacturing routes of non-oxide CMCs, Ryan Skillett, Calvin Prentice, and Victoria Lewis (Abstract and Presentation)
Small-scale testing of ceramic matrix composites, Oriol Gavalda-Diaz, Luc Vandeperre, Finn Giuliani, and Eduardo Saiz (Abstract)
Simulation assisted study on structural degradation in advanced SiC/SiC CMC component during high-temperature fatigue, Eiichi Sato, Amit Patel, Takeshi Takagi, and Naohiro Shichijo (Abstract)
Multicriteria optimization as enabler for Sustainable Ceramic Matrix Composites (SCMC), Dietmar Koch, Tobias Schneider, Andrea Thorenz, and Lars Wietschel (Abstract and Presentation)
Cumulative fracture behavior of short fiber type C/SiC, Ken Goto, Yuta Tobata, and Shinsuke Takeuchi (Abstract)
Fragmentation, sliding and interface degradation in SiC/SiC composites, Frank Zok (Abstract)
A method for estimating constitutive properties of a C/C-SiC composite materials based on a Brazilian disc specimen, Royi Padan, Rami Haj-Ali, and Dan Davida (Abstract)
Utilizing the electrical properties of non-oxide ceramic composites to diagnose damage development, test conditions and defects, Gregory Morscher (Abstract)
Detection of damage evolution in SiC/SiC under tensile loading using Talbot-Lau X-ray interferometer, Yoshihisa Tanaka (Abstract)
Microscale characterization of CMCs using 3D tomography techniques and machine learning algorithms to quantify and correlate initial microstructure to damage evolution, Ashley Hilmas and Ashley Hilmas (Abstract)
Micro-scale observation of cracking in SiC/BN/SiC ceramic matrix composites, Kaitlin Detwiler, Reece Hunt, and Elizabeth Opila (Abstract)
Lifetime prediction of self-healing ceramic-matrix composites using a multi-physics image-based model, Guillaume Couégnat, Giulia Bellezza, Mario Ricchiuto, and Gérard L. Vignole (Abstract)
Models for subcritical crack growth during static fatigue of SiC fiber in air and steam, Randall Hay, Marina Ruggles-Wrenn, Scott Robertson, Ted Shillig, Brian Kroeger, Logan Gumucio, Caleigh Nelso, Richard Reinink, and Ron Mitchell (Abstract)
Generation and evaluation of 3D digital twin of ceramic matrix composites using deep convolutional neural networks, Naohiro Shichijo; Ichiro Hirata,; Chihiro Shibata; Takanori Kamagata; and Koichi Inagaki (Abstract)
Nonlinear continuum damage models for ceramic matrix composites with significant in plane ply anisotropy, Craig Przybyla, Antoine Debarre, Jean-François Maire, Emmanuel Baranger, and Frédéric Laurin (Abstract)
Proposition and validation of a damage and failure approach for 3D woven composite materials with ceramic matrix: From elementary coupons to composite structures, Frédéric Laurin, Kaminski Myriam, and Maire Jean-François (Abstract)
New BN coating on SiC fibers as the interphase of SiC/SiC composites, Takahiro Sekigawa and Mitsuhiko Sato (Abstract)
Laser-CVD silicon carbide fibers as non woven preforms in fiber-reinforced SiC-SiC composites, Jeff Vervlied, Kirk L. Williams, Joseph Pegna, and Jeff Vervlied (Abstract and Presentation)
Development of oxide-based CMCs with high thermal stability, Isao Yamashita, Yushi Nawata, Ikuya Ohta, and Yo Hirataka (Abstract)
Ceramic matrix composites for liner system of radioactive waste disposal cells, Emilie Perret, Maxime BOX, Gerard VIGNOLES, Francis REBILLAT, and Frédéric BUMBIELER (Abstract)
Synergistic degradation mechanisms of SiC/BN/SiC in oxidizing environments at intermediate temperatures under load, Elizabeth Opila and Kaitlin Detwiler (Abstract)
Modeling environmental degradation in SiC/BN/SiC CMCs, Pavel Mogilevsky, Michael Cinibulk, and Michael Braginsky (Abstract and Presentation)
NASA Glenn high temperature EB-coated CVI SiC/SiC minicomposite testing and characterization, Douglas Kiser, Amjad Almansour, Kang Lee, Daniel Gorican, Wayne Jennings, and John Setlock (Abstract and Presentation)
The current status of advanced environmentanl barrier coatings for ceramic matrix composites at NASA, Kang Lee, Bernadette J. Puleo, Bryan J. Harder, Michael J. Presby, Anita Garg, and Wayne D. Jennings (Abstract and Presentation)
Mass transfer control in multilayer EBC systems at high temperatures, Satoshi Kitaoka, Tsuneaki Matsudaira, Makoto Tanaka, and Takafumi Ogawa (Abstract)
TGO growth behavior of modified environmental barrier coating systems, Dianying Chen, Daniel De Wet, and Chris Dambra (Abstract)
Solid particle erosion of environmental barrier coatings and ceramic matrix composites, Michael Presby, Bryan J. Harder, Kang N. Lee, and Kang N. Lee (Abstract and Presentation)
Development of EBCs and T/EBC multi-layer coatings: Challenges and implications, Ravisankar Naraparaju, Uwe Schulz, Ronja Anton, Alexandra Rose, Zachary Stein, Christoph Mikulla, and Vito Leisner (Abstract)
Burner rig optimization for high temperature materials and coating systems, Christopher Ferguson and Gregory Morscher (Abstract and Presentation)
Influence of ecological optimized manufacturing on the production costs of C/C structures using CVI technology, Denny Schüppel, Dietmar Koch, Lars Wietschel, Tobias Schneider, Philipp Goetz, and Florian Reichert (Abstract and Presentation)
Fabrication method of Yb based Oxide matrix for CMC, Hiroto Hirano, Takeshi Nakamura, Takahiko Shinohara, and Masahiro Kotani (Abstract)
Joining of SiC-SiC composites by embedded-wire CVD, Jeff Vervlied (Abstract)
Crack growth of pre-preg laminate composite subjected to elevated temperature fatigue post ballistic impact, Gregory Morscher, Joseph El Rassi, and Christopher Ferguson (Abstract)
Detection of micro cracking and SiC fiber distribution and its relationship between dark-field images using Talbot-Lau interferometer, Keiju Kawamura, Mitsuaki Furui, and Yoshihisa Tanaka (Abstract)
Durability investigation of burner rig of Yb2SiO5 environmental barrier coatings, Masahiro Negami, Kohei Kyuma, Takeo Oda, Yasuhiro Takada, Masayoshi Kobayashi, and Makoto Azuma (Abstract)
Cracking detection of a unidirectionally-reinforced SiC/SiC composite by X-ray Talbot- Lau interferometry, Masaki Kotani, Yoshihisa Tanaka, Hiroshi Hatta, and Yutaka Kagawa (Abstract)
Chemical and mechanical analysis of high temperature SiC/SiC CMC materials, Michael Goode and David Armstrong (Abstract)
Advanced materials development under NASA's Hybrid Thermally Efficient Core (HyTEC) project, Michael Presby, Kang N. Lee, and Bryan J. Harder (Abstract and Presentation)
Optimizing RMI atmosphere for SiC/SiC composites fabrication, Natsuki Murata, Natsuki Murata, Chikara Fujiwara, and Mitsuaki Furui (Abstract)
Additive manufacturing of C/C-SiC by fused filament fabrication, Stefan Schafföner, Wolfgang Freudenberg, and Nico Langhof (Abstract)
Measurement method of in-situ tensile strength of SiC fiber in SiC/SiC composite, Takumi Kiyohara, Takumi Kiyohara, Mitsuhiko Sato, Yutaka Kagawa, and Mitsuaki Furui (Abstract)
Measurement of exothermic reaction temperature during RMI process, Takumi Sato, Tomohiro Sogabe, Michio Takeda, and Mitsuaki Furui (Abstract)
Tensile loading-unloading behavior in SiC/SiC CMC at room and elevated temperature in air using a new mechanical testing machine, Tetsuya Narita, Mitsuaki Furui, and Yoshihisa Tanaka (Abstract)