Content Posted in 2023
Additive manufacturing of C/C-SiC by fused filament fabrication, Stefan Schafföner, Wolfgang Freudenberg, and Nico Langhof
Advanced materials development under NASA's Hybrid Thermally Efficient Core (HyTEC) project, Michael Presby, Kang N. Lee, and Bryan J. Harder
Advances and technical challenges in development of CMC, Takeshi Nakamura, Hiroto Hirano, Masahiro Kotani, and Naoki Yamazaki
Advances in the Electrophoretic Process to Control Oxide Coatings Microstructure for Sandrine Duluard, Sandrine Duluard, Manon Prioux, Florence Ansart, Guillaume Pujo, Philippe Gomez, and Lisa Pin
A method for estimating constitutive properties of a C/C-SiC composite materials based on a Brazilian disc specimen, Royi Padan, Rami Haj-Ali, and Dan Davida
Assembling Nanoscale Building Blocks Through Electrophoretic Deposition For Batteries, Supercapacitors, Catalysis, And Printable Electronics, Richard Robinson
A study of the radical polymerization kinetics of 2-(Dimethylamino) ethyl methacrylate in aqueous solution in the presence of monomer ionization and hydrolysis, Robin A. Hutchinson and Opeyemi J. Ajogbeje
A thermodynamic perspective on the medium dependence of propagation coefficients and reactivity ratios in radical polymerization, Hugo Vale, Peter Deglmann, and Klaus-Dieter Hungenberg
Bending strength of multi‐layered alumina with controlled residual stress, Tohru S. Suzuki, Atsushiechnology Nagase, Hajime Kiyono, and Tetsuo Uchikoshi
Biomimetic strategies for surface modification, dispersion, charging and electrophoretic deposition of materials, Igor Zhitomirsky
Biomolecule Coupling Using Alternating Current Electrophoretic Deposition: Protein; Enzyme and Polysaccharide Coatings, Merve Kübra Aktan, Mehdi Salar Amoli, Marie Van der Gucht, Rob Lavigne, Veerle Bloemen, and Veerle Bloemen
Brief overview of CMCs engine components experiments coupled with representative sub-element tests, Eric Bouillon and Sebastien Denneulin
Burner rig optimization for high temperature materials and coating systems, Christopher Ferguson and Gregory Morscher
Ceramic Matrix Composites (CMCs) at GE: From inception to commercialization, Krishan Luthra and James S. Vartuli
Ceramic matrix composites for liner system of radioactive waste disposal cells, Emilie Perret, Maxime BOX, Gerard VIGNOLES, Francis REBILLAT, and Frédéric BUMBIELER
Ceramic Matrix Composites II: Science and Technology of Materials, Design, Applications, Performance and Integration, Ram Darolia, Rishi Raj, Yutaka Kagawa, Jon Binner, Dietmar Koch, and Gerard Vignoles
Chemical and mechanical analysis of high temperature SiC/SiC CMC materials, Michael Goode and David Armstrong
Chemical and optical mixing characterization of a dynamic inline mixer, Wladislaw Dolshanskiy and Werner Pauer
Chemical and optical mixing characterization of a dynamic inline mixer, Wladislaw Dolshanskiy and Werner Pauer
Chemical recycling of polyethylene by tandem catalytic conversion to propylene, Ivan Konstantinov, Nicholas M. Wang, Garrett Strong, Vanessa Dasilva, Lijun Gao, Rafael Huacuja, Mari Rosen, Alex Nett, Sean Ewart, Roland Geyer, Susannah L. Scott, and Damien Guironnet
Combining 13C-NMR triad sequence data with joint molecular weight and composition data to estimate parameters in a gas-phase polyethylene reactor model, Jakob Straznicky, Jennifer Aiello, Lauren Gibson, Yan Jiang, Timothy Boller, Hsu Chiang, and Kimberley McAuley
Computational approach for procedural generation of protein-DNA architectures, Thor van Heesch and Jocelyne Vreede
Crack growth of pre-preg laminate composite subjected to elevated temperature fatigue post ballistic impact, Gregory Morscher, Joseph El Rassi, and Christopher Ferguson
Cracking detection of a unidirectionally-reinforced SiC/SiC composite by X-ray Talbot- Lau interferometry, Masaki Kotani, Yoshihisa Tanaka, Hiroshi Hatta, and Yutaka Kagawa
Cumulative fracture behavior of short fiber type C/SiC, Ken Goto, Yuta Tobata, and Shinsuke Takeuchi
Current trends in CMC research & development across DLR’s technology programs, Peter Mechnich, Michael Welter, and Linda Klopsch
CVI manufacturing routes of non-oxide CMCs, Ryan Skillett, Calvin Prentice, and Victoria Lewis
Design and properties of polymides with electrodeposition ability for high performance insulators, Takashi Yamashita, Ayumi Kobayashi, Kohei Iritani, Yasuhiro Funayama, and Hideyuki Kikuchi
Detection of damage evolution in SiC/SiC under tensile loading using Talbot-Lau X-ray interferometer, Yoshihisa Tanaka
Detection of micro cracking and SiC fiber distribution and its relationship between dark-field images using Talbot-Lau interferometer, Keiju Kawamura, Mitsuaki Furui, and Yoshihisa Tanaka
Developing strategies for polymer redesign and recycling using reaction pathway analysi, Linda Broadbelt
Development of ceramic matrix composites for 2500°F turbine engine applications, Olivier Sudre
Development of CMC for nuclear fuel components, Toshiki Nishimura, Shoko Suyama, Toshiaki Takada, and Masaru Ukai
Development of EBCs and T/EBC multi-layer coatings: Challenges and implications, Ravisankar Naraparaju, Uwe Schulz, Ronja Anton, Alexandra Rose, Zachary Stein, Christoph Mikulla, and Vito Leisner
Development of oxide-based CMCs with high thermal stability, Isao Yamashita, Yushi Nawata, Ikuya Ohta, and Yo Hirataka
Disentangled UHMWPE - Control of crystallization, chain entanglement and rheology via process conditions, Roberta Lopes do Rosario and Timothy McKenna
Disentangled UHMWPE - Control of crystallization, chain entanglement and rheology via process conditions, Roberta Lopes do Rosario and Timothy McKenna
Durability investigation of burner rig of Yb2SiO5 environmental barrier coatings, Masahiro Negami, Kohei Kyuma, Takeo Oda, Yasuhiro Takada, Masayoshi Kobayashi, and Makoto Azuma
Effect of matrix porosity and prepreg-tack on mechanical properties and processing of oxide ceramic matrix composites, Stefan Schafföner, Lukas Wagner, Georg Puchas, and Felix Lindner
Electro‐Bio‐Fabrication: Diverse Routes To Functional Films/Hydrogels, Gregory F. Payne
Electrofabrication and Characterization of Multifunctional, Asymmetric Bilayer Films Based on Chitosan‐Gelatin and Mesoporous Bioactive Glass Nanoparticles for Guided Bone Regeneration, Muhammad Asim Akhtar and Aldo R. Boccaccini
Electrophoretic Deposition for National Security Applications, Andrew J. Pascall
Electrophoretic Deposition of Advanced Ceramic Coatings for High Temperature Corrosion Protection of Steel Interconnects for Solid Oxide Cells, Justyna Ignaczak, Justyna Ignaczak, Piotr Jasiński, and Elisa Zanchi
Electrophoretic deposition of aramid nanofibers and carbon nanomaterials on carbon fibers, Sandrine Duluard, Wonoh Lee, and Guk Hwan Lee
Electrophoretic Deposition of Ceramic Coatings for Solid Oxide Cells: Challenges and Perspectives, Federico Smeacetto, Sebastian Molin, Antonio G. Sabato, Elisa Zanchi, Grzegorz Cempura, and Aldo R. Boccaccini
Electrophoretic Deposition of Multicomponent Coatings Incorporating Biopolymers, Phytotherapeutics and Bioactive Glass for Biomedical Applications, Zoya Hadzhieva, Can Sinsoysal, and Aldo R. Boccaccini
Electrophoretic deposition of zein/bioactive glass composite coatings doped with F and Cu on titanium for biomedical applications, Zoya Hadzhieva
ELECTROPHORETIC DEPOSITION VII: FUNDAMENTALS AND APPLICATIONS, Aldo R. Boccaccini, Begoña Ferrari, Andrew Pascall, and Tetsuo Uchikoshi
Elucidating the Role of Electrophoretic Mobility for Increasing Yield in the Electrophoretic Deposition of Nanomaterials, Prabal Tiwari, Noah D. Ferson, and Jennifer S. Andrew
Emulsion polymerization of very hydrophobic bio-based monomers: Challenges and limitations, Aitor Barquero, Oihane Llorente, María Paulis, and Jose Ramon Leiza
Encapsulation of aqueous-core nanocapsules in PLLA multicompartments microparticles, Claudia Sayer, Fernanda Steinmacher, Pedro H. Hermes de Araújo, Anna Musyanovych, and Katharina Landfester
Enforcing the formation of cycles in the random graph modelling of polymerising HDDA, Tamika van 't Hoff, Piet Iedema, and Ivan Kryven
Engineering polymers to study structure/property relationships in desalination membranes, Sean Bannon
Enzimatic polycondensation of 1,4-butanediol and diethyl succinate, Claudia Sayer, Fernando Elias Guckert, Karina Cesca, Débora de Oliveira, Pedro H. Hermes de Araújo, and Bruno Francisco Oechsler
EPD and Characterization of Graphite Oxide/Hydroxyapatite/Sodium Alginate Coatings Incorporated with Si3N4 or CuO Nanoparticles on Titanium Biomaterials, Tomasz Moskalewicz, Maciej Warcaba, Zoya Hadzhieva, Alicja Łukaszczyk, Maciej Sitarz, and Aldo R. Boccaccini
EPD Technology for Functionalizing 3D Printing Scaffolds, Begoña Ferrari
Examples of Studies on Electrophoretic Deposition Process of Functional Thin Films, Fabien Grasset, Ngan.T.K. Nguyen, Christopher L. Hassam, Wanghui Chen, Noée Dumait, Stéphane Cordier, David Berthebaud, Tetsuo Uchikoshi, and Naoki Ohashi
Fabrication method of Yb based Oxide matrix for CMC, Hiroto Hirano, Takeshi Nakamura, Takahiko Shinohara, and Masahiro Kotani
Fragmentation, sliding and interface degradation in SiC/SiC composites, Frank Zok
Functionalized lactic acid macromonomers polycondensation, Flavio Tollini, A. Zanoni, M. Sponchioni, G. Storti, and D. Moscatelli
Gas phase ethylene polymerization: What is the influence of condensed mode, Timothy McKenna, Niyi B. Ishola, Amel Ben M’Rad, and Nida Sheibat-Othman
Generation and evaluation of 3D digital twin of ceramic matrix composites using deep convolutional neural networks, Naohiro Shichijo; Ichiro Hirata,; Chihiro Shibata; Takanori Kamagata; and Koichi Inagaki
High Frequency Characterization and Nonlinear Analysis of BST Thick Films Produced by Electrophoretic Deposition, Paula M. Vilarinho, Patricia Bouca, Anna Włódarkiewicz, Alexander Tkach, M. Elizabete Costa, Ricardo Serrazina, and Nuno Borges Carvalho
How increasingly powerful PRE modeling tools allow to unlock the full potential of FRP and RDRP in aqueous emulsion, Yoshi W. Marien, Elnaz Zeinali, Sean R. George, Per B. Zetterlund, Michael F. Cunningham, Paul H.M. Van Steenberge, and Dagmar R. D’hooge
Industrial Acrylic Polymerization Modeling, Michael Grady and Amin Nasresfahani
Industrial application of all oxide ceramic matrix composites, Walter Pritzkow
Industrialization of ceramic matrix composites for aerospace applications, Mano Manoharan
Influence of ecological optimized manufacturing on the production costs of C/C structures using CVI technology, Denny Schüppel, Dietmar Koch, Lars Wietschel, Tobias Schneider, Philipp Goetz, and Florian Reichert
Influence of pH on the kinetics of polymer hydrolysis: The case of polylactic acid, Flavio Tollini, Mattia Sponchioni, Davide Moscatelli, and Giuseppe Storti
Influence of reaction conditions on the solution polymerization of vinyl acetate, Kristina Zentel, Markus Busch, and Kristina Zentel
Inline and offline particle size analysis in emulsion polymerization processes, Usue Olatz Aspiazu, Shaghayegh Hamzehlou, Jose Ramon Leiza, Maria Paulis, Kimika Aplikatua saila, and Kimika Fakultatea
In-situ observation and multi-physics simulation of reactive melt Infiltration of silicon melt into SiC-C Preform, Takeshi Yoshikawa, Hisao Esaka, Kazuki Morita, and Takahiro Sekigawa
International reliability assessment project through standard PateranoSiC(SiC/SiC), Chikara Fujiwara and Michio Takeda
In vivo applications of neuronal electrodes structured with laser‐generated platinum nanoparticles by electrophoretic deposition, Christoph Rehbock
It’s all about diffusion: Measurements and modeling of particle morphologies in dispersed-phase polymerization, John Tsavalas
Joining of SiC-SiC composites by embedded-wire CVD, Jeff Vervlied
Kinetic phenomena in mechanochemical depolymerization of poly(styrene, George Y. Chang, Francis J. Schork, and Carsten Sievers
Laser-CVD silicon carbide fibers as non woven preforms in fiber-reinforced SiC-SiC composites, Jeff Vervlied, Kirk L. Williams, Joseph Pegna, and Jeff Vervlied
Lifetime prediction of self-healing ceramic-matrix composites using a multi-physics image-based model, Guillaume Couégnat, Giulia Bellezza, Mario Ricchiuto, and Gérard L. Vignole
Manufacturing Tin Films Through A One‐Step Processing Method: Shaping and Sintering by EPD, Antonio Javier Sanchez Herencia, Zoilo Gonzalez, Joaquin Yus, Rafael Moratalla, and Begoña Ferrari
Mass transfer and agitation in the emulsion of PVDF, Timothy McKenna, Estela Gelinski, Nida Shiebat Othman, and Timothy F.L. McKenna
Mass transfer control in multilayer EBC systems at high temperatures, Satoshi Kitaoka, Tsuneaki Matsudaira, Makoto Tanaka, and Takafumi Ogawa
Mass transfer phenomena in vinylidene fluoride emulsion polymerization, Timothy McKenna and Mariana Guadaloupe Torres de Aladro
Mathematical modeling for 1,6-hexanediol diacrylate photopolymerization in presence of oxygen, Kim McAuley, Anh-Duong Dieu Vo, Kaveh Abdi, Jurre F.U. Tak, Luuk van der Velden, Robin X.E. Willemse, Marjolein N. van der Linden, and Piet. D. Iedema
Mathematical modeling for control of emulsion polymerization, Jose Maria Asua
Measurement method of in-situ tensile strength of SiC fiber in SiC/SiC composite, Takumi Kiyohara, Takumi Kiyohara, Mitsuhiko Sato, Yutaka Kagawa, and Mitsuaki Furui
Measurement of exothermic reaction temperature during RMI process, Takumi Sato, Tomohiro Sogabe, Michio Takeda, and Mitsuaki Furui
Microscale characterization of CMCs using 3D tomography techniques and machine learning algorithms to quantify and correlate initial microstructure to damage evolution, Ashley Hilmas and Ashley Hilmas
Micro-scale observation of cracking in SiC/BN/SiC ceramic matrix composites, Kaitlin Detwiler, Reece Hunt, and Elizabeth Opila
Modeling and parameter estimation for gas-phase polyethylene product properties using dynamic and steady-state data, Lauren Gibson, Kimberley B. McAuley, Yan Jiang, Hsu Chiang, and Timothy Boller
Modeling environmental degradation in SiC/BN/SiC CMCs, Pavel Mogilevsky, Michael Cinibulk, and Michael Braginsky
Modelling of a multizone circulating reactor for propylene polymerization: Impact of thermodynamic model, Kusuma Kulajanpeng, Nida Sheibat – Othman, Wiwut Tanthapanichakoon, and Timothy F.L. McKenna
Modelling of Electrophoretic Deposition (EPD) of soft particles and experimental verification, Begoña Ferrari, Joaquin Yus, Brian Giera, Andrew Pascall, Zoilo Gonzalez, and Antonio Javier Sánchez-Herencia
Models for subcritical crack growth during static fatigue of SiC fiber in air and steam, Randall Hay, Marina Ruggles-Wrenn, Scott Robertson, Ted Shillig, Brian Kroeger, Logan Gumucio, Caleigh Nelso, Richard Reinink, and Ron Mitchell
Monomer transport limitations in emulsion polymerization, Francis J. Schork
Multicriteria optimization as enabler for Sustainable Ceramic Matrix Composites (SCMC), Dietmar Koch, Tobias Schneider, Andrea Thorenz, and Lars Wietschel
Multiphysics modeling of ceramic-matrix composites processing by thermal-gradient chemical vapor infiltration, Gerard Vignoles, Cedric Descamps, Carole Charles, and Gaëtan Mangeon
Multi-scale study of ceramic composite materials for aeronautical applications, Sébastiene Denneulin and Eric Bouillon
Nanoarchitectonic photoelectrodes built‐up from octahedral metal atom cluster‐based building blocks for solar cell applications, Adèle Renaud, Tatiana Lappi, Nikolai Naumov, Yakov Gayfulin, Tetsuo Uchikoshi, Fabien Grasset, and Stéphane Cordier
NASA Glenn high temperature EB-coated CVI SiC/SiC minicomposite testing and characterization, Douglas Kiser, Amjad Almansour, Kang Lee, Daniel Gorican, Wayne Jennings, and John Setlock
New BN coating on SiC fibers as the interphase of SiC/SiC composites, Takahiro Sekigawa and Mitsuhiko Sato
Nonlinear continuum damage models for ceramic matrix composites with significant in plane ply anisotropy, Craig Przybyla, Antoine Debarre, Jean-François Maire, Emmanuel Baranger, and Frédéric Laurin
Numerical Advances in Electrophoretic Deposition in Flow Cells, Andrew J. Pascall, Miguel S alazar de Troya, and Brian Giera
Optimizing RMI atmosphere for SiC/SiC composites fabrication, Natsuki Murata, Natsuki Murata, Chikara Fujiwara, and Mitsuaki Furui
Overview of CMC activities: From high temperature characterization to applications, Guillaume Pujol and Philippe Gomez
Performance analysis of kinetic Monte Carlo algorithms for synthesis of linear polymers, Alessandro D. Trigilio, Yoshi W. Marien, Mariya Edeleva, Paul H. M. Van Steenberge, and Dagmar R. D’hooge
Polymer Reaction Engineering XI, Timothy McKenna, Markus Busch, Jay Reimers, Brian Greenhalgh, Claudia Sayer, Robin Hutchinson, Joe Schork, Jose Ramon Leiza, and John Tsavalas
Process analytics with OptoFluidic Force Induction (OF2i). A BRAVE new way in online particle characterization, Christian Hill, Marko Simic, Doris Auer, and Ulrich Hohenester
Processing and characterization of layered UHTCMCs reinforced with continuous or discontinuous carbon fibers, Antonio Vinci, Antonio Vinci, Pietro Galizia, Luca Zoli, Laura Silvestroni, and Matteo Mor
Processing, performance and process modeling of preceramic polymers, Thomas Key, Garth Wilks, and Michael Cinibulk
Proposition and validation of a damage and failure approach for 3D woven composite materials with ceramic matrix: From elementary coupons to composite structures, Frédéric Laurin, Kaminski Myriam, and Maire Jean-François
Pushing forward the predictive power of kinetic Monte Carlo simulations for detailed (de)polymerization chemistries, Yoshi W. Marien, Alessandro D. Trigilio, Mariya Edeleva, Paul H. M. Van Steenberge, and Dagmar R. D’hooge
Quantifying Electrophoretic Deposition of Nanocrystal Superlattices Using Quartz Crystal Microbalance, Bret N. Flanders, Krishna R. Panta, and Christine A. Orme
Rapid fabrication of colloidal crystal assisted by electrophoretic deposition technique, Tetsuo Uchikoshi, Thi Hoai Giang Tran, Masaki Koike, and Hiroshi Fudouzi
Reactive molding of elastomeres in 3D-printed molds for robotic actuators, Alexey Stepanyuk, Jens Chen, and Werner Pauer
Reactive molding of elastomers in 3D-printed molds for robotic actuators, Alexey Stepanyuk, Jens Chen, and Werner Pauer
Renewable barrier polymers from carbohydrates, Carson Meredith
Ring-chain equilibrium for polyester recycling, Flavio Tollini, Giuseppe Storti, Davide Moscatelli, and Massimo Morbidelli
Role Of Suspension Media For Electrophoretic Deposition: The Case Of Functional Oxides, Paula M. Vilarinho, Anna Włódarkiewicz, and Elizabete Costa
Selective absorbers based on carbon nanotube coating from Electrophoretic Deposition, Guillaume Toquer, Florian DIDIER, Patricio ALASTUEY, Monica TIRADO, and Xavier DESCHANELS
SiCf/SiC ceramic matrix composite – A turbine engine perspective, Thomas Nixon
Simulation assisted study on structural degradation in advanced SiC/SiC CMC component during high-temperature fatigue, Eiichi Sato, Amit Patel, Takeshi Takagi, and Naohiro Shichijo
Small-scale testing of ceramic matrix composites, Oriol Gavalda-Diaz, Luc Vandeperre, Finn Giuliani, and Eduardo Saiz
Solid particle erosion of environmental barrier coatings and ceramic matrix composites, Michael Presby, Bryan J. Harder, Kang N. Lee, and Kang N. Lee
Solubility of multiple gases in amorphous polypropylene, Kusuma Kulajanpeng, Nida Sheibat – Othman, Wiwut Tanthapanichakoon, and Timothy F.L. McKenna
Structurally Colored Coatings Composed of Colloidal Arrays Prepared by Electrophoretic Deposition, Kiyofumi Katagiri
Synergistic degradation mechanisms of SiC/BN/SiC in oxidizing environments at intermediate temperatures under load, Elizabeth Opila and Kaitlin Detwiler
Tensile loading-unloading behavior in SiC/SiC CMC at room and elevated temperature in air using a new mechanical testing machine, Tetsuya Narita, Mitsuaki Furui, and Yoshihisa Tanaka
TGO growth behavior of modified environmental barrier coating systems, Dianying Chen, Daniel De Wet, and Chris Dambra
The current status of advanced environmentanl barrier coatings for ceramic matrix composites at NASA, Kang Lee, Bernadette J. Puleo, Bryan J. Harder, Michael J. Presby, Anita Garg, and Wayne D. Jennings
The synthesis of isobornyl acrylate macromonomers for structured copolymer dispersants by high-temperature semi-batch radical polymerization, Elizabeth Bygott and Robin Hutchinson
The use of high-temperature semi-batch radical polymerization to synthesize acrylate based macromonomers and structured copolymer dispersants, Elizabeth Bygott and Robin Hutchinson
Turbidity spectroscopy as a potential tool to online monitor emulsion polymerization processes, Usue Olatz Aspiazu, Shaghayegh Hamzehlou, Maria Paulis, and Jose Ramon Leiza
Understanding polymerization processes in detail by combining experimental and modeling studies, Kristina Zentel, Hannah Grotian genannt Klages, and Laura Ständecke
Understanding the microstructure differences in the emulsion polymerization of bio-based and oil-based C8 alkyl (meth)acrylates, Aitor Barquero, Shaghayegh Hamzehlou, Amaia Agirre, Jose Ramon Leiza, Kimika Aplikatua saila, Kimika Fakultatea, and Fernando Ruiperez
Utilizing the electrical properties of non-oxide ceramic composites to diagnose damage development, test conditions and defects, Gregory Morscher
Wall layer formation in continuously operated tubular reactors for free- radical polymerizations, Stefan Welzel and Prof. Ulrich Nieken