Nanomechanical Testing in Materials Research and Development IX

Follow

index

 

High-temperature micropillar compression of hematite: Insights and experimental challenges, Shreehard Sahu, Gerhard Materials Dehm, and James P. Best (Abstract)

 

Multi-scale mechanical characterization of Zr-2.5Nb pressure tube alloy, Vineet Bhakhri, Zhouyao Wang, James Trevail, Hongbing Yu, Rob Beier, Chris Dixon, and Sterling St Lawrence (Abstract)

 

Measuring thin film elastic constants using combined X-ray microdiffraction and micromechanical testing, Rainer Hahn, Rebecca Janknecht, Nikola Koutná, Juraj Todt, Michael Meindlhumer, Anton Davydok, Peter Polcik, Szilárd Kolozsvári, Carmen Jerg, Jozef Keckes, Paul H. Mayrhofer, and Helmut Riedl (Abstract)

 

Nanoindentation methods for analysis of thermally activated processes at elevated temperatures, Marcel Sos, Gabrielle Tiphene, Sebastian Bruns, Jean-Luc Loubet, Yuting Dai, Christian Kübel, and Karsten Durst (Abstract)

 

Deformation twinning unraveled in A-titanium through micropillars compression loading over a wide range of strain rate, Kamila Hamulka, Tijmen Vermeij, Vivek Devulapalli, Xavier Maeder, and Johann Michler (Abstract)

 

Copper micro-honeycomb architectures: Fabrication, characterization and high strain rate testing, Kuan Ding, Szilvia Kalácska, Amit S harma, Manish Jain, Wabe Koelmans, Patrik Schürch, Gerhard Dehm, Johann Michler, and Rajaprakash Ramachandramoorthy (Abstract)

 

3D mapping of local stress by n3D-XRD-CT, Thomas Edward James Edwards, Szilvia Kalácska, Johann Michler, and Jonathan Wright (Abstract)

PDF

Study of thermo-mechanical fatigue of metallizations using correlative in situ methodologies, Sebastian Moser, Michael Reisinger, Tobias Ziegelwanger, Michael Nelhiebel, Jozef Keckes, and Megan J. Cordill (Abstract and Presentation)

 

A nanomechanical approach for efficient substitution of cobalt in high-entropy alloys and hard metals for thermal sprayed coatings, Giulia Gigante, Edoardo Rossi, Luca Bortolotti, Lorenzo Ferrari, Stefania Morelli, Giovanni Bolelli, and Marco Sebastiani (Abstract)

PDF

Nanoscale evaluation of light illumination influence on the basal slip in GaN single crystals, Ryosuke Kinoshita, Yan Li, Hiroto Oguri, Eita Tochigi, and Atsutomo Nakamura (Abstract and Presentation)

 

Defects nucleation and stability in Pt nanoparticles using Bragg coherent X-ray diffraction, Abdelrahman Zakaria, Solène Dassonneville, Olivier Thomas, Thomas Cornelius, Felisa Berenguer, Eugen l Rabkin, Marie-Ingrid Richard, and Stéphane Labat (Abstract)

 

Toward high strain rate spherical nanoindentation testing, Mohammed Tahir Abba and Benoit Merle (Abstract)

PDF

Nanomechanical testing of nitrided and nitrogen ion implanted high entropy alloys, Dariusz M. Jarząbek, Mateusz Włoczewski, and Piotr Jenczyk (Abstract and Presentation)

 

Enhanced analysis of high-speed nanoindentation data using skew-normal mixture methodology: Insights from WC-base cemented carbides, Laia Ortiz-Membrado, Raúl Benitez, Luis Llanes, and Emilio Jiménez-Piqué (Abstract)

 

In situ laue micro-diffraction during micro-pillar testing: Investigating a magnetic Heusler alloy, S. Comby-Dassonneville, T. W. Cornelius, B. E. Rhodes, D.S. Gianola, and O. Thomas (Abstract)

 

Correlative AFM-SEM microscopy of bacteria-diamond-metal nanocomposite, Jaroslav Čech, Radek Dao, Petr Haušild, Bohuslav Rezek, Egor Ukraintsev, and David Rutherford (Abstract)

 

Tailor-made non-silicon AFM probes for nanomechanical and nanotribological testing, Hanna Konopacka, Dariusz Jarząbek, Piotr Jenczyk, and Michał Milczarek (Abstract)

 

Mechanical properties of performance-critical regions in hard ceramic thin films correlated with nanoscale gradients of residual stresses and microstructure, Kevin Kutlesa, Michael Meindlhumer, Juraj Todt, Arno Köpf, Manfred Burghammer, Verena Maier-Kiener, and Jozef Keckes (Abstract)

 

Investigation of strain rate sensitivities of body centered cubic single crystals using high strain rate nanoindentation up to 10,000 s-1, Rahul Cherukuri; Aloshious Lambai; Nidhin George Mathews,; and Gaurav Mohanty (Abstract)

 

Understanding the grain boundary sliding behavior in Ni bicrystal via in situ high temperature pillar compression, Divya Sri Bandla, Subin y Lee, and Christoph Kirchlechner (Abstract)

 

Mechanical and electrical properties of nanostructured thin film metallic glasses for flexible electronic applications, Marco Ezequiel, Evgeniy Boltynjuk, Julia Ivanisenko, Damien Faurie, Philippe Djemia, Horst Hahn, and Matteo Ghidelli (Abstract)

 

Understanding transient plasticity through indentation creep tests using different indenter geometries, Suprit Bhusare, Aloshious Lambai, Johann Michler, and Gaurav Mohanty (Abstract)

 

High temperature scanning indentation: Applications, limitations and perspectives, Gaylord Guillonneau, Gabrielle Tiphéne, Guillaume Kermouche, Jean-Michel Bergheau, Warren Oliver, and Jean-Luc Loubet (Abstract)

 

Effects of the topologically close-packed (TCP) phase in the Ni-based superalloy, Subin Germany Lee, Sangwon Lee, Christoph Kirchlechner, and Pyuck-Pa Choi (Abstract)

 

Mechanical properties of sinterless 3D printed silica glass: A multi-technique comparative study, Wenjuan Cheng, Jiajie Liang, Edoardo Rossi, Jens Bauer, Laszlo Petho, and Marco Sebastiani (Abstract)

 

Use of nanocrystalline nickel microforce sensors in practice, Wojciech Dera and Dariusz Jarząbek (Abstract)

 

High strain rate mechanical behavior of materials treated by surface mechanical attrition (SMAT), Mona Stoll and Benoit Merle (Abstract)

 

Micromechanical investigation of lead-free soft solder by in-situ microcompression experiments and advanced nanoindentation, Nadine Buchebner, Verena Maier-Kiener, Daniel Kiener, and Julius Keckes (Abstract)

 

Effect of defects on the dynamic compression of strontium titanate micropillars, Rajaprakash Ramachandramoorthy, Bárbara Bellón, Wenjun Lu, Xufei Fang, and Gerhard Dehm (Abstract)

 

Deformation of silicon oxides under electron-beam irradiation and its atomistic mechanisms, Sung-Gyu Kang, Heung Nam Han, and In-Suk Choi (Abstract)

 

Study of the mechanical properties and plasticity of the C14 laves and µ-phase in the Ta-Fe(-Al) system, Christina Gasper, Nisa Ulumuddin, Tobias Stollenwerk, Elif Merve Soysal, Wei Luo, Pei-Ling Sun, Sandra Korte-Kerzel, Zhuocheng Xie, and Siyuan Zhang (Abstract)

 

Analyzing the effect of cyclic loading on microstructural changes using micro-cantilever and indentation Fatigue in NC and SC Ni, Jutta Luksch, Florentin Gaub, Alosious Lambai, Christoph Pauly, Gaurav Mohanty, Florian Schäfer, and Christian Motz (Abstract)

 

Nanomechanical properties of superconducting Nb3Sn–based wires measured by nanoindentation, Aleksandra Bartkowska, Ignacio Aviles Santillana, Stefano Sgobba, Bentejui Medina-Clavijo, and Simon Hopkins (Abstract)

 

Surface integrity of Ti6Al4V alloy as a function of AM workpiece vibration, Giselle Ramirez, Nuria Cuadrado, Eduard Garcia-Llamas, Eduard Vidales, Miguel Fuentes, and Emilio Jiménez-Piqué (Abstract)

 

Exploring micromechanical behavior of additively manufactured multi-layered medium-entropy alloy, Zhe Gao, Yakai Zhao, Dong-Hyun Lee, Pei Wang, Upadrasta Ramamurty, and Jae-il Jang (Abstract)

 

Graphene rupture and nucleation of auto-Kirigami graphene pleats by 2-dimensional nanoindentation, Pierce Sinnott, Majid Fazeli Jadidi, and Graham L. W. Cross (Abstract)

 

Doping-regulated room-temperature dislocation plasticity in SrTiO3: A multiscale approach, Chukwudalu Okafor, Ahmad Sayyadishahraki, Sebastian Bruns, Karsten Durst, and Xufei Fang (Abstract)

 

Assessment of nanomechanical properties and residual stresses in multilayer TIW-Au-TIW thin films of MEMS micro-structure, Saqib Rashid, Rossi E., and Sebastiani M (Abstract)

 

Incipient plasticity in bulk metallic glasses: insights from statistical nanoindentation at ambient and elevated temperatures, Silvia Pomes, Nozomu Adachi, Masato Wakeda, and Takahito Ohmura (Abstract)

 

Plasticity of Ca-Mg-Al laves phases and its temperature and chemistry dependence, Sang-Hyeok Lee, Martina Freund, Pei-Ling Sun, Zhuocheng Xie, Joshua Spille, and Sandra Korte-Kerzel (Abstract)

 

Tribological stress field model validation by using deformation twins as probes, Antje Dollmann, Alexander Kauffmann, Alexander Dyck, and Christian Greiner (Abstract)

 

Sol-Gel nanocoatings for anti-microbial applications: A nano-mechanical study, Ilaria Favuzzi, Edoardo Rossi, and Marco Sebastiani (Abstract)

 

Residual stress-based improvement of the fatigue life of TiAlN coated Ti-6Al-4V, Arno Gitschthaler, Rainer Hahn, Lukas Zauner, Carmen Jerg, Anders Eriksson, Jürgen Ramm, Szilard Kolozsvári, Peter Polcik, and Helmut Riedl (Abstract)

 

Mechanical properties of B2FeAl as a function of composition using targeted nanoindentation on diffusion couples, Jung Soo Lee, Gerhard Dehm, Frank Stein, and James P. Best (Abstract)

 

Multi scale micromechanical testing for new polymer core solder ball (PCSB) interconnections reliability in operating conditions, Sergio Sao-Joao, Irati Malkorra, and Guillaume Kermouche (Abstract)

 

The influence of microstructure on fracture toughness of tungsten and doped tungsten fine wire, Hannah Luise Lichtenegger, Markus Alfreider, Michael Mark, and Daniel Kiener (Abstract)

 

Thermal activation in yielding of single crystalline tungsten, Florian Tropper and Takahito Ohmura (Abstract)

 

Residual stress measurement with global method FIB-DIC on thin coatings, Paul Saby, Morgan Rusinowicz, Aurélien Villani, Daniel Maisonnette, Nicolas Compère, Gaylord Guillonneau, and Szilvia Kalacska (Abstract)

 

The origins of enhanced strength in nanoporous silver made via nanoscale additively manufactured, Rebecca Anne Gallivan, Nikolas Porenta, and Ralph Spolenak (Abstract)

 

Plastic deformation behavior of structurally related intermetallic Phases of the binary samarium- cobalt system, Tobias Stollenwerk, Pia Huckfeldt, Pei-Ling Sun, Zhuocheng Xie, Sandra Korte-Kerzel, and Nisa Ulumuddin (Abstract)

 

In situ SEM nanomechanical testing of graphene sheet, Jaroslav Lukes; Javier Varillas; and Otakar Frank, J (Abstract)

 

High throughput analysis of irradiation hardening in reduced activation ferritic-martensitic steels for future fusion applications, James S.K-L. Gibson and David Bowden (Abstract)

 

Nanoindentation characterization of local mechanical properties of Cu-Ag wires, Hanane Idrir, Anne Joulain, Christophe Tromas, Ludovic Thilly, Simon Tardieu, Florence Lecouturier, Fabien Cuvilly, and Xavier Sauvage (Abstract)

 

Nanoindentation meets APT, XRD, and EBSD: Multiphysical characterization of white etching layers in pearlitic rails, Oleksandr Glushko, Christoph Kammerhofer, Kiranbabu Srikakulapu, Juraj Todt, Anna Jelinek, Josef Keckes, and Ronald Schnitzer (Abstract)

 

Micromechanical properties of lamellar ovine bone at quasi-physiological conditions and high strain rates, Christian Minnert, Cinzia Peruzzi, Jérémie Bérard, Tatiana Kochetkova, Christopher Dreimol, Ingo Burgert, Stefan Remund, Beat Neuenschwander, Johann Michler, and Jakob Schwiedrzik (Abstract)

 

Compressive strength as a mechanical indicator of long-range order in L10 Fe-Pd nanoparticles, Yarden l Flash, Zhao Liang, Mor Levi, and Eugen Rabkin (Abstract)

 

Micromechanical assessment of fracture properties of austenitic stainless-steel grain boundaries oxidized in a pressurized water reactor environment, Marc Legros, Rachma Azihari, Jeremy Hure, and Benoït Tanguy (Abstract)

 

Temperature dependent indentation size effect in silicon iron single crystal, Petr Haušild, Jaroslav Čech, Radim Čtvrtlík, and Jiri Nohava (Abstract)

 

Optimizing FIB applications through tailored ion species selection, Nousha Kheradmand, Daniel . Pfifer, Min . Wu, and Herman . Lemmens (Abstract)

 

PEGDE cross-linked graphene oxide–chitosan as robust and high gas barrier coatings, Alessia Cabrini, Pierfrancesco Cerruti, Luigi De Nardo, and Marino Lavorgna (Abstract)

 

Enriching nanoindentation with in situ electrical measurements and SEM observations, Johann Jakob Schwiedrzik, Morgan Rusinowicz, Chaymaa Boujrouf, Marc Verdier, Muriel Braccini, and Guillaume Parry (Abstract)

 

Deformation mechanisms in novel thick copper films, Liz Karanja, Pierre-Yves Pichon, and Marc Legros (Abstract)

 

Tribochemistry of DLC Coatings with Gas Phase Lubricant Additives- Characterization with Electronic Spectroscopies, Karine Masenelli Varlot, Aslihan Sayilan, Jules Galipaud, Julien Fontaine, Christophe Heau, Lucile Joly-Pottuz, and Maria-Isabel de Barros Bouchet (Abstract)